In stamping advanced high strength steels (AHSS), the deviations from desired part geometry caused by springback from a radius, curl, twist, and bow are major impediments to successfully producing AHSS parts. In general, the conventional elastic modulus is used to quantify the strain that occurs on unloading. This unloading strain causes deviations from desired part geometry. Considerable evidence in the literature indicates that for tensile testing, the conventional elastic modulus does not accurately describe the unloading strain. The present study uses new data and results from the literature to examine the average slope of tensile stress strain curves on unloading. This slope is termed the effective unloading modulus. The results from this study quantitatively describe how the effective unloading modulus decreases with increasing strength, prestrain, and unloading time. Calculations are also included that describe the relative contributions of: 1) dislocation related phenomena, 2) thermal contraction, and 3) conventional elasticity. The effective unloading modulus can be used as an engineering estimate to replace the conventional elastic modulus in mechanics equations that predict springback from a radius, curl, twist, and bow. The results from this study also indicate a need for evaluating the effective unloading modulus for other strain paths. Determination of the effective unloading modulus for other strain paths is needed before quantitative relationships suitable for finite element analysis codes can be precisely specified.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Effective Unloading Modulus for Automotive Sheet Steels


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Levy, B. S. (Autor:in) / Mikalsen, C. (Autor:in) / Van Tyne, C. J. (Autor:in) / Moon, Y. H. (Autor:in)

    Kongress:

    SAE 2006 World Congress & Exhibition ; 2006



    Erscheinungsdatum :

    2006-04-03




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    The effective unloading modulus for automotive sheet steels

    Levy,B.S. / van Tyne,C.J. / Moon,Y.H. et al. | Kraftfahrwesen | 2006


    Unloading Modulus on Springback in Steels

    Wong, Chris / Zhu, Hong / Huang, Liang | SAE Technical Papers | 2004


    Unloading Modulus on Springback in Steels

    Zhu, H. / Huang, L. / Wong, C. et al. | British Library Conference Proceedings | 2004


    Unloading modulus on springback in steels

    Zhu,H. / Huang,L. / Wong,C. et al. | Kraftfahrwesen | 2004