Radiometric wear techniques have been applied to determine the effect of fuel-saving engine oils on journal bearing load capacity. A test machine which applied a unidirectional load to a radioactive test bearing was used to evaluate bearing load capacity. The onset of bearing wear with increasing load provided a direct measurement of fluid-film breakdown, which defined hydrodynamic bearing load capacity. From this, an “effective” lubricant viscosity was calculated by comparing the performance of non-Newtonian lubricants to the performance of Newtonian lubricants. Results show that for the oil formulations tested that employ either a low viscosity or a soluble friction modifier to reduce engine friction, there is a high correlation between high-shear viscosity and hydrodynamic load capacity. The use of an insoluble friction modifier resulted in a higher bearing load capacity than expected based on high-shear viscosity.
The Effect of Fuel-Saving Engine Oils on Journal Bearing Load Capacity–A Radiometric Evaluation
Sae Technical Papers
1982 SAE International Fall Fuels and Lubricants Meeting and Exhibition ; 1982
1982-02-01
Aufsatz (Konferenz)
Englisch
The Effect of Journal Surface Finish on Journal Bearing Load Capacity - A Radiometric Method
SAE Technical Papers | 1999
|The effect of journal surface finish on journal bearing load capacity - a radiometric method
Kraftfahrwesen | 1999
|A radiometric test to determine the lubricant effect on journal bearing load capacity
Kraftfahrwesen | 1980
|A Radiometric Test to Determine the Lubricant Effect on Journal Bearing Load Capacity
SAE Technical Papers | 1980
|