AISI-4140H steel has been used as articulated piston crown material in heavy-duty engines. With the driving force for reducing manufacturing cost, microalloyed steel (MAS) was identified as a low-cost material to replace 4140H steel. In order to determine the feasibility of using MAS to replace 4140H steel, a test program was initiated to fully evaluate the material properties of MAS and to compare them to those of the baseline 4140H steel. The physical and mechanical properties of both materials from room temperature to 550°C were evaluated. The effect of long term thermal exposure on the material properties was also studied. Some engine tests were also conducted to evaluate the performance of the articulated pistons made with both materials.The inherently lower strength of MAS as compared to 4140H steel, requires a total re-design of the piston for the utilization of MAS as a low-cost replacement material for 4140H steel. Temperature control is critical to the application of MAS at high engine ratings. Through carefully controlled abuse testing, the application of MAS as an articulated piston material can be successful.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Evaluation of Microalloyed Steel for Articulated Piston Applications in Heavy Duty Diesel Engines


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2000 World Congress ; 2000



    Erscheinungsdatum :

    06.03.2000




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :


    Evaluation of microalloyed steel for articulated piston applications in heavy duty diesel engines

    Chen,Y.C. / Worden,J.A. / Cummins Engine,GB | Kraftfahrwesen | 2000


    The Ferrum Piston for Diesel Engines-a Two-Piece Articulated Piston Design

    Eisbett, Günter / Elsbett, Klaus / Elsbett, Ludwig et al. | SAE Technical Papers | 1985


    The ferrum piston for diesel engines - a two-piece articulated piston design

    Elsbett,K. / Elsbett,G. / Elsbett,L. et al. | Kraftfahrwesen | 1985


    Development of a fiber reinforced aluminum piston for heavy duty diesel engines

    Soave,R. / Leites,J.M. / Ferran,G. et al. | Kraftfahrwesen | 1994


    Development of a Fiber Reinforced Aluminum Piston for Heavy Duty Diesel Engines

    Kuhn, Charles W. / Gegel, Gerald A. / Ferran, Gustavo et al. | SAE Technical Papers | 1994