This article describes a new transmission control system for off-highway dump trucks with small electro-hydraulic control valves which are individually equipped for each clutch. The new system mainly improves shift shocks by generating suitable clutch pressure curves while shifting.This system has some important technical points.The first one is the mechanism of the small electro-hydraulic control valve. It has two spools. One spool controls clutch pressure, and another controls oil flow and senses oil pressure. This valve recognizes the moment at which the clutch pack is filled up. It enables us to control not only the pressure curves of clutches, but also the timing of engagement and disengagement of clutches.Next technical point is that every clutch is equipped with one valve. Since one valve holds the pressure of a clutch which is being disengaged until another clutch, which is controlled by another valve, is filled up, we can keep driving torque while shifting. We developed so called “Torque-continuous shifting”.The last point is that the clutch pressure is controlled according to driving condition by an electronic control system. Using this system, we can easily get the most suitable clutch pressure for any driving condition. One drawback of using electronic system is that it is a little troublesome for mechanics to repair or to do trouble shooting. To make the repairwork easier, we provided a self diagnosis system, which also memorizes troubles in the past in a non-volatilize random access memory.This system has been already applied to our off-highway dump trucks since 1988, and has received good reputation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Transmission Control System for Construction Machinery


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Kusaka, Kohei (Autor:in) / Ohkura, Yasunori (Autor:in)

    Kongress:

    International Off-Highway & Powerplant Congress & Exposition ; 1990



    Erscheinungsdatum :

    1990-09-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A transmission control system for construction machinery

    KUsaka,K. / Ohkura,Y. / Komatsu Motor,JP | Kraftfahrwesen | 1990



    CONTROL METHOD FOR TRANSMISSION OF CONSTRUCTION MACHINERY

    Europäisches Patentamt | 2024

    Freier Zugriff

    Control system for construction machinery and control method for construction machinery

    KIM KI-YONG / AHN HYEON-SIK / JUNG WOO-YONG et al. | Europäisches Patentamt | 2019

    Freier Zugriff

    CONTROL SYSTEM FOR CONSTRUCTION MACHINERY AND CONTROL METHOD FOR CONSTRUCTION MACHINERY

    KIM KI-YONG / AHN HYEON-SIK / JUNG WOO-YONG et al. | Europäisches Patentamt | 2021

    Freier Zugriff