Varying the timing of intake-valve closing was examined on a single-cylinder engine as a means for controlling the load of a homogeneous-charge spark-ignition engine. The engine was operated unthrottled, with load control obtained by holding the intake valve open during a portion of the compression stroke. This allowed the piston to push part of the cylinder charge back into the intake manifold.Results showed that to achieve the range of load control required for vehicular operation, late intake-valve closing would have to be combined with variable-density throttling. Comparisons to a conventional engine showed the late intake-valve-closing engine to have (1) lower pumping losses, (2) lower specific fuel consumption, (3) lower nitric oxide emissions, and (4) similar HC emissions. However, the fuel-economy benefit offered by this load-control concept would be reduced by the frictional losses of a control mechanism. The current trend toward lower vehicular power/weight ratios also would diminish the impetus for this approach.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Controlling Engine Load by Means of Late Intake-Valve Closing


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    Passenger Car Meeting & Exposition ; 1980



    Erscheinungsdatum :

    01.06.1980




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Controlling engine load by means of late intake valve closing

    Tuttle,J.H. / General Motors Res.Lab.,US | Kraftfahrwesen | 1980


    Controlling Engine Load by Means of Early Intake-Valve Closing

    Tuttle,J.H. / General Motors Res.Lab.,US | Kraftfahrwesen | 1982


    Controlling Engine Load by Means of Early Intake-Valve Closing

    Tuttle, James H. | SAE Technical Papers | 1982



    Knocking Phenomena in a Gasoline Engine with Late-Intake Valve Closing

    Korah, Nader S. / Rabia, Salah M. | SAE Technical Papers | 1992