The purpose of this paper is to discuss injection rate control of the nozzle for direct injection engines. This paper will focus on fuel flow analysis of the nozzle, a key component of Fuel Injection Systems (FIS). The optimum designed nozzle improves fuel flow efficiency and controls injection rate.To meet emission regulations in 1990's, FIS are required to produce higher injection pressure and injection rate control which creates better fuel spray atomization and higher utilization of air. But the higher injection pressure makes injection rate control difficult. In particular, injection rate control by needle lift traveling control is difficult because fuel flow characteristics in the nozzle change with injection pressure and needle lift. Furthermore, the forced control of needle lift results in poor fuel spray atomization.To control injection rate with good fuel spray atomization under high injection pressure, we analyzed the fuel flow characteristics and calculated them by using a computer model simulation. We designed the optimum nozzle configuration by utilizing these methods and confirmed their effects through experiments.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Contribution of Optimum Nozzle Design to Injection Rate Control


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Kano, Hiroyuki (Autor:in) / Katagiri, Makoto (Autor:in) / Kato, Masaaki (Autor:in) / Okajima, Masahiro (Autor:in) / Tojo, Shigeki (Autor:in)

    Kongress:

    International Congress & Exposition ; 1991



    Erscheinungsdatum :

    1991-02-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Contribution of optimum nozzle design to injection rate control

    Okajima,M. / Kato,M. / Kano,H. et al. | Kraftfahrwesen | 1991


    Contribution of Optimum Design for Nozzle Configuration to Spray Formation

    Kano, Hiroyuki / Katagiri, Makoto / Kato, Masaaki et al. | SAE Technical Papers | 1990


    Contribution of optimum design for nozzle configuration to spray formation

    Kano,H. / Kato,M. / Kojima,T. et al. | Kraftfahrwesen | 1990


    Optimum Design of Defroster Nozzle

    Hoshiawa, Kiyohito / Nagataki, Masanori / Kohnotou, Takashi et al. | SAE Technical Papers | 1992


    Optimum design of defroster nozzle

    Kohnotou,T. / Iwamoto,Y. / Hoshiawa,K. et al. | Kraftfahrwesen | 1992