Experimental results are reported on spray characterization of gasoline pintle injectors A and B; the former with swirl vanes while the latter without swirl vanes upstream the pintle seat. Injection system was common rail with accumulator unit injector and pressure fuel metering. Spray tip penetration length was measured by laser beam attenuation technique. Time-resolved droplet axial and radial velocity components and droplet diameter were measured at many probe positions in both axial and radial directions by a two-component phase Doppler particle analyzer (PDPA). The measurement covered detailed spray structures of both injectors under rail pressures ranged from 8 to 14 MPa and with fuel delivery from 11 to 42 mm3/inj for Injector A and from 4 to 28mm3/inj for Injector B. Correlations of droplet velocity and diameter with arrival time to the PDPA probe volume are discussed. Different conditional Sauter mean diameters (SMD) are determined in the time domain: SMDe, a ensemble Sauter mean diameter as a function of arrival time; SMDτ, a ensemble Sauter mean diameter as a function of time after start of injection; SMDzj, a ensemble Sauter mean diameter as a function of axial. position for a given time after start of injection. For comparison, conventional mean (time independent) diameters and velocities are computed as functions of probe position. The present work helps in understanding of spray structures of gasoline injectors at different spray regions: leading edge, central body and tailing part. All experiments were conducted at ambient pressure and temperature.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Spray Characterization of High Pressure Gasoline Fuel Injectors with Swirl and Non-Swirl Nozzels


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Gebert, K. (Autor:in) / Li, S. C. (Autor:in)

    Kongress:

    Future Transportation Technology Conference & Exposition ; 1998



    Erscheinungsdatum :

    1998-08-11




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Spray characterization of high pressure gasoline fuel injectors with swirl and non-swirl nozzles

    Li,S.C. / Gebert,K. / Univ.of California,US et al. | Kraftfahrwesen | 1998


    The Spray Characteristics of Swirl Coaxial Injectors

    Han, Poong-Gyoo / Seol, Jae-Hoon / Hwang, Seong-Ha et al. | AIAA | 2003


    Transient Flows in High Pressure Swirl Injectors

    Cousin, J. / Nally, S. / Ren, W. M. | SAE Technical Papers | 1998


    Transient flows in high pressure swirl injectors

    Cousin,J. / Ren,W.M. / Nally,S. et al. | Kraftfahrwesen | 1998


    Spray Formation of High Pressure Swirl Gasoline Injectors Investigated by Two-Dimensional Mie and LIEF Techniques

    Leipertz, Alfred / Jain, Amar K. / Krämer, Hanno et al. | SAE Technical Papers | 1999