Experimental and numerical studies have been completed on the deformation behaviour of round AA6061-T6 aluminum extrusions during an axial cutting deformation mode employing both curved and straight deflectors to control the bending deformation of petalled side walls. Round extrusions of length 200 mm with a nominal wall thickness of 3.175 mm and an external diameter of 50.8 mm were considered. A heat treated 4140 steel alloy cutter and deflectors, both straight and curved, were designed and manufactured for the testing considered. The four blades of the cutter had an approximate average thickness of 1.00 mm which were designed to penetrate through the round AA6061-T6 extrusions. Experimental observations illustrated high crush force efficiencies of 0.82 for the extrusions which experienced the cutting deformation mode with the deflectors. Total energy absorption during the cutting process was approximately 5.48 kJ. Further testing, considering extrusion lengths of 200 mm and 300 mm which resulted in progressive folding and global bending deformation modes were also completed which illustrated crush force efficiencies of 0.66 and 0.20 respectively. Numerical simulation of the axial cutting deformation process followed by contact between the cut petalled extrusion side walls with either the curved or straight deflector were simulated by employing Eulerian and Smoothed Particle Hydrodynamic (SPH) mesh free methods. Good predictive capabilities of the numerical model employing the Eulerian element formulation were observed and were important towards the understanding of the contribution of deformation mechanisms and friction towards the force/displacement response of the extrusions in the cutting deformation mode with the presence of curved or straight deflectors.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Simulation of the Axial Cutting Deformation of AA6061-T6 Round Tubes Utilizing Eulerian and Mesh Free Finite Element Formulations


    Weitere Titelangaben:

    Sae Int. J. Mater. Manf
    Sae International Journal of Materials and Manufacturing


    Beteiligte:
    Majumder, Amitabha (Autor:in) / Green, Daniel (Autor:in) / Jin, Shun Yi (Autor:in) / Kapoor, Tanya (Autor:in) / Altenhof, William (Autor:in)

    Kongress:

    SAE World Congress & Exhibition ; 2008



    Erscheinungsdatum :

    14.04.2008


    Format / Umfang :

    12 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch






    Crush Characteristics of AA6061-T6 Round Tubes During a Cutting Deformation Mode

    Jin, Shun Yi / Altenhof*, William | SAE Technical Papers | 2007


    Crush characteristics of AA6061-T6 round tubes during a cutting deformation mode

    Jin,S.Y. / Altenhof,W. / Univ.of Windsor,CA | Kraftfahrwesen | 2007


    Crush Characteristics of AA6061-T6 Round Tubes During a Cutting Deformation Mode

    Jin, S. Y. / Altenhof, W. / Society of Automotive Engineers | British Library Conference Proceedings | 2007