Reducing the friction of the internal combustion engine (ICE) is of major interest to reduce fuel consumption and greenhouse gas (GHG) emissions. A huge potential for friction reduction is seen in the piston ring-cylinder liner (PRCL) coupling. Approaching the cylindrical liner shape in the hot operation state will enhance the PRCL conformation. Recently, newly developed freeform honing techniques can help to achieve this perfect cylinder shape. This article presents a numerical study of the effect of freeform honing on the geometrical performance of the liner in the hot operation state. The freeform honed liner (TR) concept is based on the approach of reversing the local deformation of a conventional circular liner. A validated computational model for a gasoline engine is used to compare the geometrical performance of those TR cases with circular, elliptical (EL), and conical elliptical liners (NEL) at different operational points. It was found that the TR concept can reduce the roundness error by 92-95% and the straightness error by 70-75% when the reference load equals the operational one. Quite a good compromise is found to be the initial NEL shape, which probably would be easier for the manufacturing process. In this study, the influence of the reference load on the shape, and with that on friction, is also investigated at different operational loads. It was found that the reference load should be selected at a medium level since commonly the deviations at higher operational loads are less problematic for friction than vice versa. The numerical studies with optimal freeform-shaped cylinder liners—or with the compromise of NEL shapes—show a promising approach to enhance the PRCL conformation and reduce engine friction.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of Freeform Honing on the Geometrical Performance of the Cylinder Liner—Numerical Study


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2022-09-01


    Format / Umfang :

    24 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Graded Freeform Machining of Cylinder Bores using Form Honing

    Flores, Gerhard Konrad | SAE Technical Papers | 2015


    Cylinder Honing For Performance

    Online Contents | 2008


    Cylinder honing

    Engineering Index Backfile | 1927


    Cylinder honing

    Engineering Index Backfile | 1934


    Liner Honing Quality Main Characteristics

    Tomanik, Eduardo | SAE Technical Papers | 1992