To investigate fatigue failure of motorcycle handlebars, fatigue analysis and durability experiments are conducted in this study. The finite element software, MSC.Nastran, was used to obtain the stress distribution of a handlebar subject to loadings in various directions. The results of FEM analysis were compared with those of static test to obtain optimum applied loading direction in the durability test. The strain history of the handlebar was measured when a motorcycle traveled on the Belgium (Pave) Road. The applied loading history in the durability test was obtained with remote parameter control technique. Three methods including “traditional S-N approach”, “BS 5400 approach” and “BS 5400 with Gurney thickness modification approach” were used to analyze the fatigue life of the handlebars. Rainflow cycle counting method and Miner’s damage accumulation rule were applied. FEM results show that when the loading angle of the actuator is 26° from the horizontal, a crack is produced where the handle was welded to the main pipe. This coincides with the test result in full vehicle simulation. The traditional S-N approach and BS 5400 standard approach cannot give a satisfactory result for fatigue life prediction. On the other hand, the BS 5400 standard with the Gurney thickness modified approach gives a satisfactory result. The difference between the predicted results and the experimental results was within an acceptable range of 2.5 times. It means the BS 5400 standard with the Gurney thickness modified approach could be used to assess the durability of motorcycle handlebars.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Durability Assessments of Motorcycle Handlebars


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Chang, Chih-Huang (Autor:in) / Fung, Chin-Ping (Autor:in) / Hwang, Jiun-Ren (Autor:in) / Wu, Jui-Hung (Autor:in) / Chang, Jung-Ming (Autor:in) / Lin, Ken-Yuan (Autor:in) / Chang, Shun-Hui (Autor:in)

    Kongress:

    SAE 2005 World Congress & Exhibition ; 2005



    Erscheinungsdatum :

    11.04.2005




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Durability assessments of motorcycle handlebars

    Lin,K. / Chang,J. / Hwang,J. et al. | Kraftfahrwesen | 2005


    SEPARATED HANDLEBARS

    NISHIDA KAZUHIRO / NAGAMOTO HIROYUKI | Europäisches Patentamt | 2018

    Freier Zugriff

    HANDLEBARS WITH FOLDING HANDLES

    NYURKIN ALEKSANDR GENNADEVICH | Europäisches Patentamt | 2018

    Freier Zugriff

    Retractable wheelchair handlebars

    GRANTHAM IV ALBERT GALLATIN | Europäisches Patentamt | 2019

    Freier Zugriff

    Integrated drive for bicycle handlebars

    DAL PRÀ GIUSEPPE | Europäisches Patentamt | 2020

    Freier Zugriff