Hydraulic systems are widely used in working actions of mobile machines. They offer good power to weight ratio, robustness and relatively good controllability. However, there has been growing interest on the energy efficiency of such machines during recent years. Load sensing proportional valve control is a typical solution for multi-actuator systems leaving a significant margin for improvement of energy efficiency. Digital hydraulic valve system enables independent metering and reduces losses significantly without a need of complete redesign of the hydraulic system of such machine. Digital hydraulic valve system consists of parallel connected on/off-valves and offers deterministic operation which is crucial for successful implementation of independent metering.Four different digital hydraulic valve control approaches are analyzed in the paper: four-edge-control, four-edge control with pressurized tank line, five-edge-control and six-edge-controlled three-chamber-cylinder. The energy efficiency of digital hydraulic valve control is theoretically estimated for different operation points in steady-state conditions for single and multi-actuator systems. Another point of view is achieved by comparing measured energy consumption of the different approaches on a single-actuator test bench.Energy recuperation becomes possible by utilizing digital hydraulic valve technology together with suitable supply system. Furthermore, the power generated by the supply unit can be better distributed among a number of active actuators through different control modes. The experimental results show that the energy losses can be decreased up to 67 % by replacing load sensing 4-way proportional valve with digital hydraulic valve system capable of independent metering.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Energy Efficiency of Digital Hydraulic Valve Control Systems


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Huhtala, Kalevi (Autor:in) / Linjama, Matti (Autor:in) / Huova, Mikko (Autor:in)

    Kongress:

    SAE 2013 Commercial Vehicle Engineering Congress ; 2013



    Erscheinungsdatum :

    2013-09-24




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Marine hydraulic valve control systems

    Burnison, R.A. | Tema Archiv | 1983


    Digital valve technology applied to the control of an hydraulic valve actuator

    Misovec,K.M. / Johnson,B.G. / Mansouri,G. et al. | Kraftfahrwesen | 1999


    MANUFACTURING METHOD OF HYDRAULIC CONTROL VALVE, HYDRAULIC CONTROL VALVE, AND HYDRAULIC POWER STEERING DEVICE

    FUJIMOTO MASATOSHI / BANDO YUUKI | Europäisches Patentamt | 2015

    Freier Zugriff

    Digital Valve Technology Applied to the Control of an Hydraulic Valve Actuator

    Johnson, Bruce G. / Mansouri, Gary / Misovec, Kathleen M. et al. | SAE Technical Papers | 1999