This paper illustrates the results of an experimental investigation on the liquid fuel spray from a multi-jet common rail injection system both under non evaporative and evaporative conditions. Tests have been taken using a 5 hole, 0.13 mm diameter, 150° spray angle, micro-sac nozzle having a flow rate of 270 cm3/30 sec@10 MPa exploring different injection strategies.Experiments have been taken, under non evaporative conditions, injecting the fuel within stagnant inert gas, at different density, in a high-pressure optically-accessible cylindrical vessel with three large quartz windows.Under evaporative conditions, the experiments have been taken within a crank-case scavenged single-cylinder 2-stroke direct injection Diesel engine provided of optical accesses to the combustion chamber. It allows to study the fuel injection process under thermodynamic conditions similar to those currently reached in modern direct injection diesel engines. The air velocity field within the combustion chamber is low enough to assume that the fuel is injected at quiescent conditions, guaranteeing the same fluid flow conditions as those reproduced for tests within the vessel for non evaporative spray conditions.The investigation has allowed to assess the management of timing and quantity up to 3 consecutive injections on the accuracy and stability of the delivered fuel as well the effect of the gas density on the liquid spray penetration. The exploration has also been focused on the effect of short dwell time on the stability of the mass flow rate injected during the pre injection matching measurements of the amount of delivered fuel to images of the spray.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Experimental Investigation of a Spray from a Multi-jet Common Rail Injection System for Small Engines


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Montanaro, A. (Autor:in) / Corcione, F.E. (Autor:in) / Caputo, G. (Autor:in) / Valentino, G. (Autor:in) / Allocca, L. (Autor:in) / Alfuso, S (Autor:in)

    Kongress:

    7th International Conference on Engines for Automobile ; 2005



    Erscheinungsdatum :

    2005-09-11




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Spray characterization from common rail injection system for use in locomotive engines

    El-Hannouny, Essam / Longman, Douglas / McConnell, Steven et al. | Tema Archiv | 2008


    Multi-zone predictive modeling of common rail multi-injection diesel engines

    Arsie,I. / di Genova,D. / Mogavero,A. et al. | Kraftfahrwesen | 2006


    Multi-Zone Predictive Modeling of Common Rail Multi-Injection Diesel Engines

    Caraceni, A. / Mogavero, A. / Pianese, C. et al. | SAE Technical Papers | 2006


    Common rail injection system development for HSDI diesel engines

    Nakawaga,M. / Miyata,Y. / Kuroyanagi,M. et al. | Kraftfahrwesen | 1999