The mechanism of valve seat recession is well understood and a review of the existing literature shows that it consists of two processes - the generation of hard particles that then grind or abrade the valve seats. Metallic fuel additives can prevent recession by stopping the generation of these hard particles. Both new and previously published data are presented to demonstrate that low concentrations of all the commonly available additives provide adequate protection for most service applications. However, the data also show that severe testing with low treat rates will produce valve seat recession. The author argues that, if sufficient concentration of additive is used, the initiation of recession is stopped under extremely severe conditions and alternatives to lead can offer complete protection.The paper concludes that the use of lead replacement additives should be at the maximum possible level commensurate with all aspects of engine performance. There are no standard tests for valve seat recession and, as a consequence, the additive supplier must be responsible for recommending dose rates that do not lead to potentially harmful side effects.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Valve Seat Recession - An Independent Review of Existing Data


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    CEC/SAE Spring Fuels & Lubricants Meeting & Exposition ; 2000



    Erscheinungsdatum :

    19.06.2000




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Valve seat recession - an independent review of existing data

    Hutcheson,R.C. / Cameron Assoc.,US | Kraftfahrwesen | 2000


    Prevention of Valve-Seat Recession in European Markets

    McArragher, J. S. / Clarks, L. J. / Paesler, H. et al. | British Library Conference Proceedings | 1993


    Design tools for prediction of valve recession solving valve/seat failure problems

    Lewis,R. / Dwyer-Joyce,R.S. / Univ.of Sheffield,GB | Kraftfahrwesen | 2001


    Design Tools for Prediction of Valve Recession and Solving Valve/Seat Failure Problems

    Lewis, R. / Dwyer-Joyce, R. S. | SAE Technical Papers | 2001


    Valve recession modelling

    Slatter,T. / Lewis,R. / Dwyer-Joyce,R.S. et al. | Kraftfahrwesen | 2006