Finding optimal split hybrid configurations through exhaustive search is almost intractable, mainly due to the huge design space, e.g. 252 compound split configurations using two planetary gear sets (PG). Thus, a systematic exhaustive design methodology is required to find optimal configurations. While most of the prior studies proposed methodologies that assess the performance within the physical design space, i.e. based on the powertrain configurations, this paper proposes a compound lever-based comprehensive design methodology. The (virtual) compound lever is an attractive design tool defined by two design variables, i.e. α and β, that omits the redundancy existing within the physical design space, thus, reduces the computational load. The proposed method explores the entire (virtual) compound lever design space to find optimal compound split configurations with outstanding fuel economy and acceleration performance. First, two performance metrics, i.e. fuel economy and acceleration performance, are assessed within the entire compound lever design space, and optimal compound lever designs, i.e. optimal α and β, are selected. These selected compound lever designs, however, lack the physical parameters (e.g. PGs connections and gear ratios) required for further design steps. Therefore, a conversion model and conversion equations are developed in order to convert the selected optimal compound lever designs into feasible powertrain configurations. The developed compound-lever design methodology was applied to a few optimal designs on the Pareto front, and multiple novel compound split configurations with outstanding fuel economy and acceleration performance were found.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Compound Lever Based Optimal Configuration Selection of Compound-Split Hybrid Vehicles


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Kum, Dongsuk (Autor:in) / Kim, Hyunjun (Autor:in) / Barhoumi, Toumadher (Autor:in)

    Kongress:

    WCX™ 17: SAE World Congress Experience ; 2017



    Erscheinungsdatum :

    2017-03-28




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :



    Analysis on compound-split configuration of power-split hybrid electric vehicle

    Wang, Weihua / Song, Ruifang / Guo, Mingchen et al. | Tema Archiv | 2014


    COMPOUND TORQUE MULTIPYING LEVER PROPELLED BICYCLE

    SCARBOROUGH RASHAD NA'IM | Europäisches Patentamt | 2019

    Freier Zugriff

    Development of a Compound Power-split Hybrid Power System for Commercial Vehicles

    Li, Qing / Zhang, Zhendong / Bai, Jianyong et al. | Springer Verlag | 2022


    POWERTRAIN SYSTEM FOR HYBRID VEHICLES HAVING COMPOUND AND SPLIT MODES OF OPERATION

    SUNTHARALINGAM PIRANAVAN / EMADI ALI | Europäisches Patentamt | 2018

    Freier Zugriff