In this paper, we propose a hardware and a software design method considering functional safety for an electro-mechanical brake (EMB) control system which is used as a brake actuator in a brake-by-wire (BBW) system. A BBW system is usually composed of electro-mechanical calipers, a pedal simulator, and a control system. This simple by-wire structure eliminates the majority of bulky hydraulic brake devices such as boosters and master cylinders. The other benefit of a BBW system is its direct and independent response; this leads to enhanced controllability, thus resulting in not only improved basic braking performance but also considerably easier cooperative regenerative braking in hybrid, fuel-cell, and electric cars. The importance of a functional safety based approach to EMB electronic control unit (ECU) design has been emphasized because of its safety critical functions, which are executed with the aid of many electric actuators, sensors, and application software. Based on hazard analysis and risk assessment according to ISO26262, the EMB system should be ASIL-D compliant, the highest ASIL level. To this end, an external signature watchdog and an Infineon 32-bit microcontroller TriCore are used to reduce risks considering common-cause failure. Moreover, a software design method is introduced for implementing functional safety oriented monitoring functions based on an asymmetric dual core architecture considering redundancy and diversity. The validity of the proposed ECU design approach is verified by using the EMB hardware-in-the-loop simulation (HILS). Furthermore, it is shown that the existing sensor fault tolerant control system can be used more effectively for mitigating the effects of hardware and software faults by applying the proposed functional safety oriented ECU design method.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Functional Safety Compliant ECU Design for Electro-Mechanical Brake (EMB) System


    Weitere Titelangaben:

    Sae International Journal of Passenger Cars. Mechanical Systems
    Sae Int. J. Passeng. Cars - Mech. Syst


    Beteiligte:
    Hwang, Gunn (Autor:in) / Ahn, Hyun-Sik (Autor:in) / Cheon, Jae Seung (Autor:in) / Lee, Kyung-Jung (Autor:in) / Ki, Young-Hun (Autor:in)

    Kongress:

    SAE 2013 Brake Colloquium & Exhibition - 31st Annual ; 2013



    Erscheinungsdatum :

    2013-09-30


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Functional Safety Compliant ECU Design for Electro-Mechanical Brake (EMB) System

    Lee, K.-J. / Ki, Y.-H. / Ahn, H.-S. et al. | British Library Conference Proceedings | 2013


    Approach to functional safety-compliant ECU design for electro-mechanical brake systems

    Lee, K. J. / Ki, Y. H. / Cheon, J. S. et al. | British Library Online Contents | 2014


    Approach to functional safety-compliant ECU design for electro-mechanical brake systems

    Lee, K. J. / Ki, Y. H. / Cheon, J. S. et al. | Springer Verlag | 2014


    Approach to functional safety-compliant ECU design for electro-mechanical brake systems

    Lee, K. J. / Ki, Y. H. / Cheon, J. S. et al. | Online Contents | 2014


    Functional Safety (ASIL-D) for an Electro Mechanical Brake

    Seifert, Harald / Peternel, Jure / Zach, Maximilian et al. | SAE Technical Papers | 2016