In the current scenario, the major thrust is to simulate the customer usage pattern and lab test using virtual simulation methods. Going ahead, prime importance will be to reduce the number of soft tool prototype for all tests which can be predicted in CAE. Automotive door slam test is significantly complex in terms of prediction through simulation. Current work focuses on simulating the slam event and deriving load histories at different mounting locations through dynamic analysis using LSDyna. These extracted load histories are applied to trimmed door Nastran model and modal transient analysis is performed to find the transient stress history. This approach has a significant advantage of less computation time and stress-convergence with Nastran for performing multiple design iterations compared to LSDyna. Good failure correlation is achieved with the test using this approach. Using these load histories, design improvements are evaluated and robustness of the approach is validated. An attempt is made to extract load histories using virtual mule in LSDyna. So, at an early stage in a project, using the only hinge and latch CAD location with closure mass, inertia and center of gravity, the load histories can be extracted and design improvement can be evaluated. Detailed analysis of predicting over-slam through simulation and effect of the position of glass on strain at different locations is highlighted.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Closure Slam CAE Method Investigation for Automobiles


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2016 World Congress and Exhibition ; 2016



    Erscheinungsdatum :

    05.04.2016




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Closure slam CAE method investigation for automobiles

    Undakat,S.B. / Kangde,S. / Burkul,M. et al. | Kraftfahrwesen | 2016


    Slam life assessment method for closure durability

    Zilincik,S.E. / DeFrank,J. / Miller,S.G. et al. | Kraftfahrwesen | 1998


    Door Slam CAE Method Investigation

    Song, Guangtian Gavin / Tan, Chin-An | British Library Conference Proceedings | 2015


    Door Slam CAE Method Investigation

    Tan, Chin-An / Song, Guangtian Gavin | SAE Technical Papers | 2015


    Door slam CAE method investigation

    Song,G.G. / Ta,C.A. / Wayne State Univ.,Detroit,US | Kraftfahrwesen | 2015