This paper describes a simplified three-dimensional modeling of the mixture formation and combustion processes in a direct injection (D.I.) diesel engine. The fuel-air mixing and combustion processes in the D.I. diesel engine can be characterized by the combined effects of some processes, such as spray trajectory, fuel vaporization, gas motion, combustion, and dispersion of gaseous components and enthalpy. Each process was computed by a simple sub-model based on the experimental results and empirical equations. The dispersion process was, however, computed by solving the conservation equations of the gaseous components and enthalpy by the finite difference technique. The sub-models were combined for predicting the three-dimensional distributions of the gaseous components and the temperature in the combustion chamber, and finally the cylinder pressure, heat release rate, engine performance and pollutant emissions (NO and soot). An application of this model was made to a small D.I. diesel engine with a bore of 78 mm and a stroke of 86 mm. The computation was made under various intake swirl ratios and piston cavity diameters. Reasonable agreement between computed and experimental results for these engine variables demonstrate that, with appropriate adjustments to the empirical coefficients of each model, the model produces qualitatively realistic predictions of the in-cylinder processes and engine performance.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE International Congress and Exposition ; 1989



    Erscheinungsdatum :

    1989-02-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Simplified three-dimensional modeling of mixture formation and combustion in a D.I. diesel engine

    Nishida,K. / Hiroyasu,H. / Univ.of Hiroshima,JP | Kraftfahrwesen | 1989


    Mixture Formation and Combustion in the Dl Diesel Engine

    Arcoumanis, C. / Schindler, K.-P | SAE Technical Papers | 1997



    Three Dimensional Modeling of Combustion and Soot Formation in an Indirect Injection Diesel Engine

    Poplow, F. / Zellat, M. / Rolland, Th. | SAE Technical Papers | 1990


    Three dimensional modeling of diesel engine intake flow, combustion and emissions

    Reitz,R.D. / Rutland,C.J. / Univ.of Wisconsin-Madison,US | Kraftfahrwesen | 1995