The traditional practice of setting up a new forming operation relies on years of experience and expensive die try-outs to gather the information for die design. Today's complete modeling of a 3D sheet metal forming can provide accurate information but is usually too time consuming. Currently, the time and cost effective method used in industries is to model the straight side of a 3D part as a plane strain problem and the corner section as an axisymmetric problem. Unfortunately, the axisymmetric solution often over-predicts the severity of the deformation at the corner and leads to a very conservative design. In an effort to improve the predictability of the simplified 2D model, an axisymmetric model with a center offset is proposed in this study. The proposed center offset is found to be a function of the center strains, failure height, and process parameters, which include tooling geometry, material properties, friction coefficient, and restraining force. Finite element analysis for both the 3D square box forming and the 2D axisymmetric model are utilized to verify the proposed concept and to define the function. Great improvements for the predictions of the failure heights are obtained. The simplified 2D models with a center offset proved to be a useful numerical tool that can provide accurate quantitative information for the designer to make decisions quickly on the manufacturability of the desired parts.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Simplified 2D Model for Predicting Corner Failure in a Square Part


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Kinsey, Brad L. (Autor:in) / Yao, Hong (Autor:in) / Cao, Jian (Autor:in)

    Kongress:

    International Congress & Exposition ; 1999



    Erscheinungsdatum :

    1999-03-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A simplified 2D model for predicting corner failure in a square part

    Yao,H. / Kinsey,B.L. / Cao,J. et al. | Kraftfahrwesen | 1999


    A Simplified 2D Model for Predicting Corner Failure in A Square Part

    Yao, H. / Kinsey, B. L. / Cao, J. et al. | British Library Conference Proceedings | 1999


    Corner-cut square microcavity coupled waveguide crossing

    Chung Yan Fong, / Poon, A.W. | IEEE | 2004


    Prognostic rules for predicting a part failure

    JOHAN ARNOLD SMIT / PAUL BUTTERLEY | Europäisches Patentamt | 2020

    Freier Zugriff

    Prognostic rules for predicting a part failure

    SMIT JOHAN ARNOLD / BUTTERLEY PAUL | Europäisches Patentamt | 2019

    Freier Zugriff