A customised version of FIRE™ code is chosen to simulate the spray injected into a controlled environment by means of a Common Rail system driven via a Programmable Electronic Control Unit. Numerical results are compared to experimental data collected under various operating conditions, namely varying the injection pressure up to 120 MPa, and the gas back-pressure between 0.1 and 5.0 MPa. Non-evaporating conditions are considered.The employed optically accessible test chamber allows to light the spray with a flash lamp or a pulsed laser sheet, generated on the second harmonic of a Nd-YAG laser (532 nm, 12 ns in duration). Images are collected at different instants of time after the start of injection by means of a CCD camera. A digital image processing software is used to evaluate the major characteristics of the spray, as the penetration length and the cone angle. The injection flow rate is properly measured on a rate-of-injection flow bench for different injection strategies. This allows to recover the instantaneous injection velocity, which is an input quantity for the numerical simulation.The spray dynamics is reproduced by accounting for the flow inside the nozzle, as well as the successive occurrence of primary and secondary atomisation. The competing effects of turbulence, cavitation and aerodynamic shears are considered as concurring to primary atomisation. Secondary atomisation is simulated by adding models previously used for blob injection. Turbulent dispersion and drops interaction are also considered. Different grids are tested, in order to verify how the cell size affects the numerical results.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Numerical and Experimental Analysis of Multiple Injection Diesel Sprays


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Corcione, F. E. (Autor:in) / Allocca, L. (Autor:in) / Costa, M. (Autor:in)

    Kongress:

    2004 SAE Fuels & Lubricants Meeting & Exhibition ; 2004



    Erscheinungsdatum :

    08.06.2004




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Numerical and experimental analysis of multiple injection diesel sprays

    Allocca,L. / Corcione,F.E. / Costa,M. et al. | Kraftfahrwesen | 2004


    Experimental and numerical studies of high pressure multiple injection sprays

    Su,T.F. / Patterson,M.A. / Reitz,R.D. et al. | Kraftfahrwesen | 1996


    Experimental and Numerical Studies of High Pressure Multiple Injection Sprays

    Patterson, M. A. / Farrell, P. V. / Reitz, Rolf D. et al. | SAE Technical Papers | 1996


    Wall Impingement of CR Diesel Sprays: Experimental and Numerical Analysis

    Allocca, L. / De Vita, A. / Rosa, P. | British Library Conference Proceedings | 2003


    Wall Impingement Of Cr Diesel Sprays: Experimental And Numerical Analysis

    Allocca, L. / De Vita, A. / Rosa, P. | British Library Conference Proceedings | 2003