In this study, the influence of compressor speed, ejector motive nozzle needle position and evaporator inlet metering valve opening on the oil circulation rates (OCRs) of an automotive R744 transcritical standard ejector cycle was experimentally investigated. Significantly higher OCR (~10%) was observed at the evaporator inlet of the ejector cycle than at the high pressure side. It has been observed that evaporator OCR was increased with increasing compressor speed. When the motive nozzle needle moved towards the nozzle throat, both compressor discharge flow rate and evaporator OCR were observed to be significantly lowered. As the evaporator inlet metering valve opening was adjusted, the compressor mass flow rate did not vary significantly while the evaporator mass flow rate decreased with decreasing metering valve opening. The evaporator OCR decreased from 6.5% to 2.2% as the metering valve opening varied from 86% to 27%.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Oil Circulation Rate in Ejector Cooling Cycles


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Botticella, Francesco (Autor:in) / Zhu, Jingwei (Autor:in) / Elbel, Stefan (Autor:in)

    Kongress:

    WCX World Congress Experience ; 2018



    Erscheinungsdatum :

    03.04.2018




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Oil Circulation Rate in Ejector Cooling Cycles

    Zhu, Jingwei / Botticella, Francesco / Eibel, Stefan | British Library Conference Proceedings | 2018


    Ejector-assisted liquid metal topping cycles

    Angelino, G. | Online Contents | 2004


    Pulsed Ejector Cooling System

    du Clou, Sven / Brooks, Michael / Lear, William et al. | AIAA | 2012


    Fuel cell cooling system, cooling method and cooling ejector

    CUI YANWEI / WANG TAO / LI WENWEN et al. | Europäisches Patentamt | 2024

    Freier Zugriff

    Cathode ejector cooling flow control system

    WANG HUNG-CHI / LEGG MATTHEW / COERTZE RUDOLF JACOBUS | Europäisches Patentamt | 2024

    Freier Zugriff