The prediction of the sound characteristic of a drive train in early development stages is desirable. However, at the state of the art, the structural dynamics cannot be calculated with satisfactory accuracy. Challenging is especially the calculation of the damping forces, which arise from various and partly nonlinear effects. In practice this leads to the necessity of prototypes to measure the damping, which this contribution aims to overcome. In this paper, the damping is calculated from geometry and material data by considering the contributing effects individually. The resulting modal damping values enable the mode superposition method and are therefore suitable for e.g. elastic multibody simulations. The dominant damping mechanisms in case of solid bodies are material damping and sound radiation. However, the method is in principle capable of incorporating e.g. damping due to joints as well. The method is applied to two solid aluminum and one orthotropic sheet metal test object. The modal damping values for validation are extracted from measured frequency response functions applying the circle fit and the least squares rational fit method. The error introduced by assuming proportional damping, which underlies the damping extraction as well as the simulation, is estimated with an exemplary frequency response function.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    On the Calculation and Measurement of Modal Damping


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Hameyer, Kay (Autor:in) / Franck, Marius (Autor:in) / Jaeger, Markus (Autor:in)

    Kongress:

    12th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference ; 2022



    Erscheinungsdatum :

    15.06.2022




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    On the Calculation and Measurement of Modal Damping

    Jaeger, Markus / Franck, Marius / Hameyer, Kay | British Library Conference Proceedings | 2022


    Measurement Point Selection and Modal Damping Identification for Bladed Disks

    Holland, D. / Rodgers, J. / Epureanu, B. et al. | British Library Conference Proceedings | 2011


    Prediction and measurement of modal damping factors for viscoelasticspace structures

    MCTAVISH, D. J. / HUGHES, P. C. / SOUCY, Y. et al. | AIAA | 1992


    Measurement Point Selection and Modal Damping Identification for Bladed Disks

    Holland, Darren / Rodgers, Jason / Epureanu, Bogdan | AIAA | 2011


    Prediction and measurement of modal damping factors for viscoelastic space structures

    McTavish, D.J. / Hughes, P.C. / Soucy, Y. et al. | Tema Archiv | 1992