Hyperelastic material simulations are commonly performed in commercial FE codes due to availability of sophisticated algorithms facilitating virtual characterization of such materials in FEA easily. However, the solution time required is longer in FEA. Especially when excitation frequencies do not interfere with structural modes, flexible multibody simulation offers a lucrative and computationally inexpensive alternative. However, it is difficult to directly characterize hyperelastic materials in commercial MBS simulation codes, so the reduced solution time comes at the cost of decreased simulation accuracy, especially if the designer is provided with crude stress - strain test data. Hence, the need is to overcome the drawbacks in FEA and multibody codes, as well as to leverage best of both these codes simultaneously. A methodology is presented where non-linear stiffness properties of the hyperelastic materials are expressed as an analytical function in terms of constants of hyperelastic constitutive material models. The constants are first determined from best fit done to the test data within commercial FE codes. Subsequently, the governing strain energy density functions of the respective hyperelastic materials are differentiated analytically. Lastly, the constants are substituted into the derived nonlinear force-displacement analytical function, which can be directly input to the commercial MBS simulation code. Such a force-displacement analytical model is scalable and can also be combined with viscoelastic simulation. A case study is presented to demonstrate simple use of such nonlinear force - displacement characteristics that can be applied to uniaxial lumped springs in a multibody simulation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Derivation of Non-linear Stiffness Characteristics for Lumped Uniaxial Springs from Hyperelastic Material Constitutive Models


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Thipse, Y. S. (Autor:in)

    Kongress:

    International Conference on Automotive Materials & Manufacturing 2014 ; 2014



    Erscheinungsdatum :

    28.04.2014




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Study on Stiffness Characteristics of Rubber Springs for Rail Vehicles Based on Different Constitutive Models

    DENG Mengjun / WANG Xili / XIA Zhangyang et al. | DOAJ | 2025

    Freier Zugriff

    Symmetric stiffness matrix for incompressible hyperelastic materials

    TAKAMATSU, T. / STRICKLIN, J. A. / KEY, J. E. | AIAA | 1976




    A Coupled Hyperelastic Constitutive Model for Resilient Response of Granular Materials

    Hjelmstad, K. D. / Taciroglu, E. / American Society of Civil Engineers; Airfield Pavement Committee | British Library Conference Proceedings | 1997