Through aggressive application of the Miller Cycle, using two-stage turbocharging, medium speed diesel marine and stationary power engines are demonstrating over 30 bar rated power BMEP, and over 50 percent brake thermal efficiency. The objective of this work was to use engine cycle simulation to assess the degree to which the aggressive application of the Miller Cycle could be scaled to displacements and speeds more typical of medium and heavy truck engines. A 9.2 liter six-cylinder diesel engine was modeled. Without increasing the peak cylinder pressure, improved efficiency and increased BMEP was demonstrated. The level of improvement was highly dependent on turbocharger efficiency - perhaps the most difficult parameter to scale from the larger engines. At 1600 rpm, and a combined turbocharger efficiency of 61 percent, the baseline BMEP of 24 bar was increased to over 26 bar, with a two percent fuel consumption improvement. As turbocharger combined efficiency increased, to over 75 percent as seen in large, medium speed engines, over 29 bar BMEP was achieved, with over six percent fuel consumption improvement. Similar results were seen at 1200 rpm, with a maximum BMEP of over 34 bar, and greater than two percent fuel consumption improvement, at a turbocharger combined efficiency of 61 percent. Application considerations including speed and load range, and emission constraints are discussed.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    An Exploratory Look at an Aggressive Miller Cycle for High BMEP Heavy-Duty Diesel Engines


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Hoag, Kevin L. (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2019



    Erscheinungsdatum :

    2019-04-02




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Steel pistons for high bmep diesel engines?

    Norbye,E. / T and N Technology,US | Kraftfahrwesen | 1988


    A New Type of Miller Supercharging System for High Speed Engines-Part 2 - Realization of High BMEP Diesel Engines

    Hikino, Hajime / Kawashima, Yasukuni / Ishizuki, Yoshiaki et al. | SAE Technical Papers | 1985



    Improvement of BMEP for Natural Gas Fueled Spark Ignition Engines by Using Miller Cycle and EGR

    Zhang, F.-R. / Okamoto, K. / Shimogata, S. et al. | British Library Online Contents | 1998


    Study of Connecting Rod for High BMEP Engines

    Dani, A. D. / Wani, P. R. / Reddy, P. V. | SAE Technical Papers | 2005