Flow-generated noise has recently received a lot of attention within the process of designing exhaust and intake systems. Flow-generated noise can limit the amount of sound reduction a muffler can introduce inside ducts. This is more important in the modern system design where mufflers are compact and the flow speeds become higher in different sections inside the muffler. In this paper, three measurement techniques are used to measure the flow-generated noise from a duct element. The first is based on calculating the sound power levels inside a reverberation room according to ISO 3741. The radiated noise is measured from the muffler body as a source of noise, then from the tail pipe as an active one-port source. The second is based on sound power measurements inside the ducts using the active two-port theory. The third is measuring the sound pressure radiation inside an anechoic room. There has been a lot of work done to calculate the flow generated noise from simple duct elements but little has been published on full mufflers. In this paper, a compact muffler was studied. A 1D model based on the two-port theory was built for this muffler and whereas the flow-generation mechanisms were included in the active two-port formulation, and calculated using different scaling laws from literature for different duct elements such as orifices, pipes and open ends. Comparisons between simulations and measurements were performed to prove the reliability of the flow noise simulation technique.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Measurement of Flow-Generated Noise inside Mufflers


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Abosrea, Ahmad (Autor:in) / Elnady, Tamer (Autor:in)

    Kongress:

    Noise and Vibration Conference and Exhibition ; 2017



    Erscheinungsdatum :

    2017-06-05




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Noise control with mufflers

    Crocker,M.J. / H:Crocker,M.J. / Purdue Univ.,Sch.of Mech.Engng.,Ray W.Herrick Lab.,West Lafayette,US | Kraftfahrwesen | 1975


    Mufflers

    Simanaitis,D.J. | Kraftfahrwesen | 1977


    Computational Prediction and Measurement of Break-out Noise of Mufflers

    Munjal, M. L. / Narayana, T. S. S. | SAE Technical Papers | 2007


    Idle relief mufflers and outboard motors having idle relief mufflers

    JENSEN DANIEL W / AHLSWEDE SCOTT G / WAISANEN ANDREW S et al. | Europäisches Patentamt | 2016

    Freier Zugriff

    Exhaust headers and mufflers

    Black, Archibald | Engineering Index Backfile | 1918