As part of the update process to SAE J1637, “Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar”, the Acoustical Materials Committee commissioned a round robin study to determine the current laboratory-to-laboratory variation, and to better understand best practices for composite loss factor measurements. Guidance within the current standard from a previous round robin study indicates a coefficient of variation of 35% for laboratory-to-laboratory measurements. It was hoped that current instrumentation and test practices would yield lower variability. Over the course of 5 years, 10 separate laboratories tested 4 bars: three damped steel bars and one bare steel bar. The bars were tested at -20°C, -5°C, 10°C, 25°C, 40°C, and 55°C. The damping materials were intentionally selected to provide low damping, moderate damping, and high damping to illustrate difficulties in determining the composite loss factor with increased damping. Additionally, the differences between automated and manual data acquisition systems and contact and non-contact transducers are reviewed. The results of this study were used for the 2021 update to the SAE J1637 standard.
SAE J1637 Vibration Damping Round Robin Study: Summary and Conclusions
Sae Technical Papers
Noise and Vibration Conference & Exhibition ; 2023
08.05.2023
Aufsatz (Konferenz)
Englisch
SAE J1637 Vibration Damping Round Robin Study
British Library Conference Proceedings | 2017
|SAE J1637 Vibration Damping Round Robin Study
SAE Technical Papers | 2017
|Summary of the NASA-SRI Round Robin Ablation Program
AIAA | 1971
|NTRS | 1964
|AIAA | 1979
|