With the help of theoretical considerations it is shown that the flow between a car and the ground is of boundary layer type, as long as there is no recirculation. Thus, boundary layer theory can be applied to evaluate the order of magnitude of typical effects like displacement and momentum-loss thicknesses of ground-plane boundary layer. If the boundary layer in a wind tunnel with stationary ground is to be controlled, either by distributed suction or by tangential blowing, to simulate on-road conditions, boundary layer theory can provide the orders of magnitude of modifications that have to be applied. Experiments with a ground-effect quarter-scale car with ground simulation by distributed suction and moving belt showed coincidence with theoretical predictions concerning the required suction rate, if integral coefficients (eg CD, CL) of both flow cases are matched. Since the flow was recirculating over the moving belt however, there were significant physical differences compared to ground simulation by boundary layer suction along a stationary ground. Such types of flows can only be created with the help of tangential blowing, as long as a stationary ground plane is to be used. For the ground-effect as well as for a typical passenger car, there was a fairly small sensitivity of the integral quantities to oversuction.
Some Basic Investigations into the Principles of Ground Simulation Techniques in Automotive Wind Tunnels
Sae Technical Papers
SAE International Congress and Exposition ; 1989
1989-02-01
Aufsatz (Konferenz)
Englisch
Comparison of Different Ground Simulation Techniques for Use in Automotive Wind Tunnels
SAE Technical Papers | 1990
|Comparison of different ground simulation techniques for use in automotive wind tunnels
Kraftfahrwesen | 1990
|Advanced techniques for flow simulation in automotive climatic wind tunnels
Kraftfahrwesen | 1991
|Advanced Techniques for Flow Simulation in Automotive Climatic Wind Tunnels
SAE Technical Papers | 1991
|