A Small Loop Heat Pipe (SLHP) featuring a wick of only 1.27 cm (0.5 inches) in diameter has been designed for use in spacecraft thermal control. It has several features to accommodate a wide range of environmental conditions in both operating and non-operating states. These include flexible transport lines to facilitate hardware integration, a radiator capable of sustaining over 100 freeze-thaw cycles using ammonia as a working fluid and a structural integrity to sustain acceleration loads up to 30 g. The small LHP has a maximum heat transport capacity of 120 Watts with thermal conductance ranging from 17 to 21 W/°C. The design incorporates heaters on the compensation chamber to modulate the heat transport from full-on to full-stop conditions. A set of start up heaters are attached to the evaporator body using a specially designed fin to assist the LHP in starting up when it is connected to a large thermal mass. The total mass of the small Loop Heat Pipe, including the evaporator body and the radiator, is only 1.4 kg.This paper describes the steady state and transient performance of the small LHP in four different orientations: vertical, horizontal, adverse and reflux. The tests include start up and shut off results for the four orientations at hot and cold case conditions. The results of the test program indicate that the small LHP can successfully transport moderate heat loads for many space related applications.
Thermal Performance Evaluation of a Small Loop Heat Pipe for Space Applications
Sae Technical Papers
International Conference On Environmental Systems ; 2003
07.07.2003
Aufsatz (Konferenz)
Englisch
Thermal Performance Evaluation of a Small Loop Heat Pipe for Space Applications
British Library Conference Proceedings | 2003
|Tema Archiv | 2012
|Performance Evaluation When Using Nanofluids in Loop Heat Pipe and Pulsating Heat Pipe
British Library Conference Proceedings | 2007
|