Generally, pass-by noise levels measured outdoors vary according to the influence of weather conditions, background noise and the driver’s skill. Manufactures, therefore, are trying to reproduce proving ground driving conditions on a chassis dynamometer. The tire noise that occurs on actual road surfaces, however, is difficult to reproduce in indoor tests. In 2016, new pass-by noise regulations (UN R51-03) will take effect in Europe, Japan and other countries. Furthermore, stricter regulations (2dB) will take effect in 2020. In addition to the acceleration runs required under current regulations, UN R51-03 will require constant speed runs. Therefore, an efficient measurement methods are necessary for vehicle development. To solve the above mentioned issues, an indoor evaluation system capable of reproducing the tire noise that occurs on road surfaces has been developed. Using a newly developed semi-anechoic chamber with a chassis dynamometer, pass-by noise at a 7.5 m microphone position can be measured. The facility has a background noise level of NC15 and an exhaust gas circulation system to accurately measure exhaust noise. By combining tire noise levels on actual road surfaces with indoor test levels, reproduction of pass-by noise in a chassis dynamometer can be achieved. In order to identify the tire noise on the actual road surface, the noise near the tires and the road is first measured outdoors, then all sources except for the tire noise are removed from a contribution analysis of then indoor measurement. For accurate measurement of tire noise during acceleration, a new technique was developed that can maintain the relative location of microphone and noise source. By applying a SUB matrix method which performs an inverse matrix operation on each noise source, the accuracy of the contribution analysis can be improved.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Indoor Pass-by Noise Evaluation System Capable of Reproducing ISO Actual Road Surface Tire Noise


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Umemura, Eiji (Autor:in) / Goto, Kuniaki (Autor:in) / Takahira, Masakiyo (Autor:in) / Komada, Masashi (Autor:in) / Kondo, Takashi (Autor:in) / Nishimura, Yasuhiko (Autor:in)

    Kongress:

    SAE 2016 World Congress and Exhibition ; 2016



    Erscheinungsdatum :

    05.04.2016




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Indoor Pass-by Noise Evaluation System Capable of Reproducing ISO Actual Road Surface Tire Noise

    Goto, Kuniaki / Kondo, Takashi / Takahira, Masakiyo et al. | British Library Conference Proceedings | 2016


    Temperature Dependency of Pass-By Tire Road Noise

    Konishi, S. / Fujino, T. / Tomita, N. et al. | British Library Conference Proceedings | 1997


    Temperature dependency of pass-by tire road noise

    Konishi, S. / Fujino, T. / Tomita, N. et al. | Tema Archiv | 1997


    Temperature dependency of pass-by tire road noise

    Konishi,S. / Fujino,T. / Tomita,N. et al. | Kraftfahrwesen | 1997


    Temperature Dependency of Pass-By Tire Road Noise

    Tomita, Naotaka / Konishi, Satoshi / Fujino, Toshiaki et al. | SAE Technical Papers | 1997