More stringent emissions regulations, fuel economy standards, and regulations are currently being discussed to help reduce both CO2 and exhaust emissions. Vehicle manufacturers have been developing new engine technologies, such as downsizing and down-speeding with reduced friction loss, improved engine combustion and efficiency, heat loss recycling, power-train friction loss recycling, and reduced power-train friction loss.The use of more efficient fuel economy 5W-30 engine oils for heavy duty commercial vehicles has started to expand since 2009 in Japan as one technological solution to help reduce CO2 emissions. However, fuel economy 5W-30 oils for use in heavy duty vehicles in Europe are mainly based on synthetic oils, which are much expensive than the mineral oils that are predominantly used in Japan.The main key technologies for mineral oil-based 5W-30 engine oils are the additive technologies used to determine the optimum conditions for the friction modifier, viscosity modifier, and HTHS viscosity in accordance with the lubrication conditions of the bearings, pistons, cylinders, and valve train on the Stribeck curve. A mineral oil-based 5W-30 engine oil is also required to have excellent detergency and anti-wear performance.This paper describes the evaluation of fresh engine oils using engine tests, with a particular focus on the viscosity index and HTHS viscosity to help determine the effect of these oils on improving engine fuel economy. The HTHS viscosity was evaluated at 150°C/107s−1 instead of the typical 150°C/106s−1.This paper also focuses on the boundary lubrication conditions and ways to improve fuel economy using the friction modifier. The fuel economy improvement effect was evaluated through engine tests after first confirming the friction reduction effect of the friction modifier through rig tests. Furthermore, an additional evaluation was carried out using carbon black to evaluate the effect of used oil under actual usage conditions.This research is expected to help contribute to the further expansion of the use of mineral oil-based 5W-30 engine oil in heavy duty diesel engines.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of Fuel Economy Engine Oil for Heavy Duty Diesel Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Akamatsu, Atsushi (Autor:in) / Inaba, Hideaki (Autor:in) / Tomizawa, Kenji (Autor:in) / Sato, Motoshige (Autor:in) / Aoki, Ryuji (Autor:in) / Onishi, Takahiro (Autor:in) / Tatani, Takahiro (Autor:in) / Hashimoto, Takashi (Autor:in) / Nakamura, Yoichiro (Autor:in)

    Kongress:

    JSAE/SAE 2015 International Powertrains, Fuels & Lubricants Meeting ; 2015



    Erscheinungsdatum :

    2015-09-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Heavy Duty Diesel Engine Fuel Economy: Lubricant Sensitivities

    Taylor, R. I. / Society of Automotive Engineers | British Library Conference Proceedings | 2000


    Heavy Duty Diesel Engine Fuel Economy: Lubricant Sensitivities

    Taylor, R. I. | SAE Technical Papers | 2000


    Heavy duty diesel engine fuel economy: lubricant sensitivities

    Taylor,R.I. / Shell Global Solutions,GB | Kraftfahrwesen | 2000


    Development of fliel economy Heavy Duty Diesel Engine oil

    Nakamura, H. / Mura, M. / Sanse, K. et al. | British Library Conference Proceedings | 2008


    Heavy-Duty Diesel Fuel Economy

    Foster,D.E. / Myers,P.S. / Univ.of Wisconsin,Madison,US | Kraftfahrwesen | 1982