For auto-body structures, thin walled hydroformed and laser beam welded hollow steel sheet sections are recommended as a replacement for mainly spot-welded box-shape components. Such components have the same strength but a lighter weight.Pre-bending into the required shape prior to the hydroforming step is difficult to realize in the case of thin wall thicknesses in combination with small bending diameters and relatively large tube diameters. There are bending limits with respect to buckling or cracking which have still to be clearly defined.The boundaries for the cold rotary draw bending process are fixed in the so called “bending diagram”. This diagram in itself is insufficient. Based on simple equations in combination with numerical calculations, an analytical equation was drawn up to better define the boundary conditions. This also takes into account the influence of the material.Furthermore, a new and low-cost mandrel is presented which enables the realization of the pre-bending process under extreme conditions. One of the characteristic features of such a bending mandrel is the in-line calibration of the tube to clamp very thin walls and eliminate the ovality. For example, we are currently working on tubes with an outer diameter of 60 mm, a wall thickness of 0.5 mm and a bending radius of 99 mm.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Thin Walled Steel Tube Pre-Bending for Hydroformed Components - Bending Boundaries and Presentation of a New Mandrel Design


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Blümel, Klaus W. (Autor:in) / Kibben, Martin (Autor:in) / Flehmig, Thomas (Autor:in)

    Kongress:

    SAE 2001 World Congress ; 2001



    Erscheinungsdatum :

    05.03.2001




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Tube and sheet hydroformed steel components for autobody application

    Drewes, E.J. / Blümel, K. / Lenze, F.J. | Tema Archiv | 2001


    Production System for Thin-walled Tube Bending

    Yoshino, Tamio / Tashiro, Yoji | SAE Technical Papers | 2003


    Hydroformed Thin-wall Tubing for Lightweight Steel Vehicles

    Miner, R. | British Library Conference Proceedings | 1999


    20037063 2003-01-2787 Production System for Thin-walled Tube Bending

    Tashiro, Y. / Yoshino, T. / Society of Automotive Engineers of Japan | British Library Conference Proceedings | 2003