Effect of process parameters on friction stir spot welding (FSSW) of 5052 Al alloy has been evaluated. A plunge type FSSW machine was used for this study. Sheet thicknesses of 1 and 1.6mm were used. The tool rotation rate was varied between 1000 and 3000 rpm. The tool plunge rate and dwell time was varied to give weld cycle of 1-4 seconds. Shear tests were performed in 2 sheet and 3 sheet configurations to determine the influence of processing parameters on the mechanical properties of lap joint FSSWs. Higher joint strengths were observed at lower tool rotation rates.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of Welding Parameters on Properties of 5052 Al Friction Stir Spot Welds


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Mishra, R. S. (Autor:in) / Sharma, S. R. (Autor:in) / Freeney, T. A. (Autor:in)

    Kongress:

    SAE 2006 World Congress & Exhibition ; 2006



    Erscheinungsdatum :

    03.04.2006




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Effect of welding parameters on properties of 5052 AL friction stir spot welds

    Freeney,T.A. / Sharma,S.R. / Mishra,R.S. et al. | Kraftfahrwesen | 2006


    Friction and Wear Properties of Friction Stir Welds of 5052 Al Alloy

    Wang, X. H. / Wang, K. | British Library Conference Proceedings | 2007


    Factors affecting the properties of swept friction stir spot welds

    Tweedy,B.M. / Widener,C.A. / Merry,J.D. et al. | Kraftfahrwesen | 2008


    Factors Affecting the Properties of Swept Friction Stir Spot Welds

    Tweedy, B. M. / Widener, C. A. / Burford, D. A. et al. | SAE Technical Papers | 2008


    Energy Generation and Stir Zone Dimensions in Friction Stir Spot Welds

    Gerlich, A. / Bendzsak, G. J. / Su, P. et al. | SAE Technical Papers | 2006