As new smart systems for passenger cars are assisting me driver to handle manoeuvres in critical and normal situations, brake systems are required to fulfill the compatibility and interface demands. These advanced brake systems will be operated in a remote mode during normal braking and for autonomous brake interventions. BOSCH is developping a brake-by-wire system on a hydraulic basis, called ‘Electrohydraulic Brake EHB’. Brake pressure buildup is supplied by a high pressure accumulator. Generation of the high pressure is done by an electric motor driven pump, similar to current ABS-systems.Pressure at the wheel brakes is individually controlled by closed-loop pressure control, consisting out of inlet, and outlet valves, pressure sensor and corresponding algorithm. It is specified, that this control must be completely noiseless, proportional, fast, and highly accurate. To raise the acceptance of such a system, it will be introduced with a conventional hydraulic backup. The backup actuates the front wheel brakes. In the normal operating mode the master cylinder is switched to a hydraulic pedal travel simulator to give the right feeling and sensitivity at the brake pedal.The system comes together with ABS, ASR, and VDC functions, optimized by using the wheel brake cylinder pressure information and proportional brake pressure control. It incorporates electronic brake force distribution between front and rear and even left and right, thus improving stopping distances and stability, making better use of the rear brakes than conventional systems.It can be shown that ABS and other regulations can be done fully hidden for the driver. No noise from the pressure control or pedal reactions are noticed.Autonomous vehicle guiding systems, such as advanced cruise control, collision avoidance (assist) systems, necessary for Intelligent Vehicle Highway System IVHS, and functional upgrading like hill-bolder systems, and parking aids will have an ideal brake basis to act on.Further concepts of integrating various other drivetrain and comfort systems will have a brake system that fulfills their needs. Functional enhancement can be added to the brake system with minimal hydraulic modifications.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Electrohydraulic Brake System - The First Approach to Brake-By-Wire Technology


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Congress & Exposition ; 1996



    Erscheinungsdatum :

    1996-02-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Electrohydraulic brake system - the first approach to brake-by-wire technology

    Jonner,W.D. / Winner,H. / Dreilich,L. et al. | Kraftfahrwesen | 1996


    Electrohydraulic Brake System - The First Approach to Brake-By-Wire Technology

    Jonner, W.-D. / Winner, H. / Dreilich, L. et al. | British Library Conference Proceedings | 1996


    Electrohydraulic Brake

    HWANG WOO HYUN | Europäisches Patentamt | 2021

    Freier Zugriff

    ELECTROHYDRAULIC BRAKE SYSTEM

    AHN SUNG-KI | Europäisches Patentamt | 2023

    Freier Zugriff

    Electrohydraulic Brake

    Europäisches Patentamt | 2021

    Freier Zugriff