Two-stroke cycle direct injection engines can achieve adequate stability at idle with stratified combustion at very lean overall air-fuel ratio, but exhaust temperature is very low. A rotary valve system was designed to spill charge from the cylinder into the intake tract during the compression stroke, in order to allow stable operation at lower engine delivery ratio and thereby increase exhaust temperature.Reduction of the engine delivery ratio was not achieved due to the poor scavenging characteristics of the swirl liners used, which resulted in high content of exhaust residual gas in the spill recirculation flow. Although the concept objective of higher exhaust temperature was not realized, the results indicate that the concept may be feasible if high purity of the spill recirculation flow can be achieved in conjunction with high trapping efficiency.
Initial Evaluation of a Spill Valve Concept for Two-Stroke Cycle Engine Light Load Operation
Sae Technical Papers
International Off-Highway & Powerplant Congress & Exposition ; 1990
1990-09-01
Aufsatz (Konferenz)
Englisch
Initial evaluation of a spill valve concept for two-stroke cycle engine light load operation
Kraftfahrwesen | 1990
|The Initial Development of a Two-Stroke Cycle Biogas Engine
SAE Technical Papers | 1993
|The Initial Development of a Two-Stroke Cycle Biogas Engine
Kraftfahrwesen | 1993
|Engine Downsizing through Two-Stroke Operation in a Four-Valve GDI Engine
SAE Technical Papers | 2016
|Initial development of a two-stroke cycle diesel engine for automotive applications
Tema Archiv | 1987
|