During a test programme on a modern heavy-duty engine, measurements were made at engine-out and tailpipe of particle number and particulate mass using the draft heavy-duty inter-laboratory correlation exercise guide prepared by the UN-ECE Particle Measurement Programme (PMP)1. In addition to the PMP measurements, the elemental carbon content of the particulate matter from this programme was analysed using thermogravimetric analysis of separate filters.The particle number measurement system proved to provide a reliable and repeatable measurement procedure. Test results over a variety of operational cycles showed a reduction in particle numbers of some 3 orders of magnitude. Particle number emissions were of similar magnitude regardless of the test cycle. Background-corrected particulate mass emissions results using the partial flow dilution method showed emissions levels below 5mg/kWh over all the transient cycles tested.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Heavy-duty Engine Particulate Emissions: Application of PMP Methodology to Measure Particle Number and Particulate Mass


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Nicol, Andrew (Autor:in) / Such, Chris (Autor:in) / Bosteels, Dirk (Autor:in) / May, John (Autor:in) / Andersson, Jon (Autor:in)

    Kongress:

    SAE World Congress & Exhibition ; 2008



    Erscheinungsdatum :

    2008-04-14




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch






    Fuel Composition Effects on Heavy-Duty Diesel Particulate Emissions

    Wall,J.C. / Hoekmann,S.K. / Chevron Fuels,Richmond,California,US | Kraftfahrwesen | 1984


    Evaluation of heavy-duty engine exhaust particulate traps

    Urban,C.M. / Wagner,R.D. / Southwest Research Inst.,US et al. | Kraftfahrwesen | 1985


    Particulate Mass and Number Emissions from Light-duty Low Emission Gasoline Vehicles

    Frodin, Bruce / Toutoundjian, Henry / Cruz, Manuel et al. | SAE Technical Papers | 2010