Because of the superior advantages of electric bus on energy saving and emission reduction than the traditional diesel bus, the electric buses are widely used in short-distance travel and urban public transportation. However, during the use of the electric bus, according to the reflection of the passengers and the drivers, the vibration noise was abnormal under the two-gear and the three-gear acceleration conditions. Compared with the traditional diesel bus, the gearbox noise of electric bus is more prominent due to time varying loads effect and the absence of diesel engine masking effect under the acceleration condition, which deteriorates the NVH characteristics of the whole vehicle. Therefore, the gearbox of electric bus is researched as an object in this paper. The test results showed that the radiated noise of the gearbox under the three-gear acceleration condition was significantly higher than the two-gear acceleration condition, and the meshing noise of the shifting gear of the three-gear was found to be the main source of the gearbox radiated noise under the three-gear acceleration condition by order analysis, so the shifting gear of the three-gear was optimized as an object. In this paper, the boundary element radiated noise model has been established in the acoustic radiation software, and the radiated noise model has been verified by the bench test under the three-gear acceleration condition. In order to optimize the three-gear acceleration radiated noise, method of gear microscopic modification has been used and has had a relative effect on the TE (Transmission Error) and the radiated noise.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Optimization under Acceleration Conditions of Electric Bus Based on Gear Micro-Modification Methods




    Erscheinungsdatum :

    2019




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Gearbox Noise Optimization of Electric Bus Based on Gear Modification

    Chen, Yong / Yu, Miao / Liu, Hai et al. | British Library Conference Proceedings | 2019


    Study and Application of Gear Micro Modification of Electric Drive System

    Chen, Chen / Wei, Dan / Yu, Hao et al. | SAE Technical Papers | 2022


    Influence of Micro Geometry Modification on Gear Dynamics

    Rosso, Carlo / Marcellini, Claudio / Bruzzone, Fabio et al. | SAE Technical Papers | 2020