Corresponding to the demand for light and strong connecting rods for passenger cars, the authors started the project on development of a high strength free machining microalloyed steel and the application to new light steel connecting rods. To meet the demand that the new steel has high strength and good machinability, the influence of alloying elements such as C, Mn, Cr, V, S, Pb, and Ca on fatigue strength and machinability was investigated. 1.1%Mn-0.5%Cr is the best combination to obtain the high fatigue strength. Lowering the carbon content down to 0.33% and increasing the vanadium content to control the hardness gives the high toughness which improves the fatigue strength of free machining grades with S and Pb. The finally obtained chemical composition is 0.33%C-1.05%Mn-0.5%Cr-0.12%V-0.055%S-0.20%Pb-Ca. The steel has a fatigue strength 26% higher than a conventional high strength type of microalloyed forging steel (0.39%C-1.05%Mn-0.11%V).Based on the fundamental data of the newly developed steel, a new connecting rod was designed and examined. The weight of the connecting rod is about 15% lower then the conventional one.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of High Fatigue Strength Free Machining Microalloyed Steel for Connecting Rods


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Congress & Exposition ; 1993



    Erscheinungsdatum :

    01.03.1993




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of high fatigue strength free machining microalloyed steel for connecting rods

    Nakamura,S. / Mizuno,K. / Matsubara,T. et al. | Kraftfahrwesen | 1993


    Development of High Strength Microalloyed Steel for Connecting Rod

    Mori, M. / Yano, M. / Manabe, T. et al. | British Library Conference Proceedings | 1997


    Development of High Fatigue Strength for Powder-Forged Connecting Rods

    Takada, Kentaro / Sato, Masaaki / Takada, Minoru et al. | SAE Technical Papers | 2008


    Development of High Fatigue Strength for Powder-Forged Connecting Rods

    Takada, K. / Kogure, R. / Sato, M. et al. | British Library Conference Proceedings | 2008


    Development of High Strength, Fracture Split Steel Connecting Rods

    Lee, C. K. / Ko, Y. S. / Kim, S. H. et al. | British Library Conference Proceedings | 2007