This experimental investigation is an initial step in separating the influences of swirl and inducted kinetic energy on combustion in a homo - geneous charge engine. By rotation of the intake port about the axis of the intake valve, the swirl ratio was varied from zero to 2,8 while maintaining constant intake port flow, and hence constant inducted kinetic energy. Combustion data were obtained at a low speed, light load operating point (1500 RPM/60 psi IMEP) with MBT spark timing. The effects of the increase in swirl were a 25% decrease in ignition delay, a 10% decrease in combustion duration, and a significant improvement in combustion stability. Estimates were made on the effect of swirl on turbulence intensity (10% increase) and integral length scale (10% decrease). Both the increase in swirl and the use of a near-central spark plug location improved the lean operability. This enabled the ISFC to be reduced by more than 11% compared with the case of peripheral spark plug and zero swirl at equal combustion stability. In this comparison, the reduced ISFC via lean operation was accompanied by a decrease in ISNOX from >16 to 0.4 and an increase in ISHC from <1.9 to 6,8 gm/IHP-HR.
The Effect of Swirl on Combustion in a Pancake Chamber Spark Ignition Engine: The Case of Constant Inducted Kinetic Energy
Sae Technical Papers
SAE International Congress and Exposition ; 1988
1988-02-01
Aufsatz (Konferenz)
Englisch
The effect of swirl on spark-ignition engine combustion
Kraftfahrwesen | 1985
|Combustion Chamber Effects on Burn Rates in a High Swirl Spark Ignition Engine
SAE Technical Papers | 1983
|Combustion Chamber effects on burn rates in a high swirl spark ignition engine
Kraftfahrwesen | 1983
|The effect of swirl control on combustion improvement of spark ignition engine
Kraftfahrwesen | 1983
|