LDA measurements of the flow in a motored engine near TDC of compression have been obtained, along with burnrate data in a firing engine having a near-central spark plug location. Results are reported for two different intake ports and four intake valve lifts varying from 25% to 100% of full lift. Opposite trends of swirl vs valve lift were found for the two ports, and the rms velocity fluctuation was found to be relatively insensitive to changes in valve lift. Regression analysis of the burn duration data was conducted, with swirl ratio and rms as independent variables. The analysis indicated that burn duration decreases with an increase in swirl ratio and/or rms velocity fluctuation. In light of the experimental findings, a new conceptual model is proposed regarding the effect of valve lift on the dissipation of turbulent velocity via changes in the length scale. And combustion-induced shear in the unburned gas resulting from conservation of angular momentum is hypothesized as a possible mechanism for increased burnrate due to swirl for the case of central ignition.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effects of Intake Port Design and Valve Lift on In-Cylinder Flow and Burnrate


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Mikulec, A. (Autor:in) / Davis, G. C. (Autor:in) / Kent, J. C. (Autor:in) / Haghgooie, M. (Autor:in) / Tabaczynski, R. J. (Autor:in)

    Kongress:

    1987 SAE International Fall Fuels and Lubricants Meeting and Exhibition ; 1987



    Erscheinungsdatum :

    01.11.1987




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Influence of Intake Valve Lift on Flow Capacity of Intake Port

    Xu, Yang / Liu, Fushui / Rui, Jingmin et al. | British Library Conference Proceedings | 2019


    Influence of Intake Valve Lift on Flow Capacity of Intake Port

    Liu, Fushui / Rui, Jingmin / Hua, Yang et al. | SAE Technical Papers | 2019


    Effects of intake port design and valve list on in-cylinder flow and burnrate

    Kent,J.C. / Haghgooie,M. / Mikulec,A. et al. | Kraftfahrwesen | 1987


    Intake and Cylinder Flow Modeling with a Dual-Valve Port

    Rutland, C. J. / Pieper, C. M. / Hessel, R. | SAE Technical Papers | 1993


    Intake and Cylinder Flow Modeling with a Dual-Valve Port

    Rutland,C.J. / Pieper,C.M. / Hessel,R. et al. | Kraftfahrwesen | 1993