One of the primary functions of automobile suspension bushings is to isolate the vibrations being transmitted from the suspension to the passenger compartment. Under certain operating and road conditions, the viscoelastic characteristics of the rubber bushings are not sufficiently high to damp out the road disturbances. Also, small amplitude disturbances from the road at the tire foot prints are usually too small to activate the shock absorber and hence are not easily damped out. Low torque bushings can improve this situation using Coulomb damping which is generated by providing a slip surface between the rubber and the inner or outer metal. This construction therefore allows the possibility of controlling the torsional deformation and limiting the torque transmitted under service conditions by adjusting the torque required to slip.In this paper, we study the behavior of low torque bushings in an automotive rear suspension and compare their performance against conventional bushings. The tire footprint is given an input to simulate the vehicle traveling over a bump and the responses of the bushings are computed. By varying the slip torque, it is shown that an optimum value exists which provides maximum dissipation. The frequency characteristics of the torque transmitted by the bushing are also presented.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Simulation of Low Torque Bushings in Automobile Suspensions


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE Noise and Vibration Conference and Exposition ; 1995



    Erscheinungsdatum :

    01.05.1995




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Simulation of low torque bushings in automobile suspensions

    Mani,N.K. / Satyamurthy,K. / GenCorp Corporate Technology Center,US | Kraftfahrwesen | 1995


    Simulation of Low Torque Bushings in Automobile Suspensions

    Mani, N. K. / Satyamurthy, K. / Society of Automotive Engineers | British Library Conference Proceedings | 1995


    Transmissible torque of keyless taper bushings

    Koyama,T. / Terada,T. / Kagotani,M. et al. | Kraftfahrwesen | 1991


    Bushings, apparatuses including bushings, and associated methods

    CALLAHAN KEVIN S / FISHER ROBERT EARL / ALVARADO JR SANTIAGO | Europäisches Patentamt | 2015

    Freier Zugriff

    BUSHINGS, APPARATUSES INCLUDING BUSHINGS, AND ASSOCIATED METHODS

    CALLAHAN KEVIN S / FISHER ROBERT EARL / ALVARADO SANTIAGO JR | Europäisches Patentamt | 2016

    Freier Zugriff