The engine performance, combustion characteristics and the effect of injection timing differences of a prechamber-type diesel engine operated by Diesel-fuel and methanol were investigated. When the Diesel-fuel is used as a pilot fuel, the ignition lag was mainly controlled by the Diesel-fuel.The maximum thermal efficiency occurs with the optimum main methanol injection timing. The optimum methanol injection timing is about 2 to 3 degrees crank angle before the ignition, as methanol vapor is required for smooth combustion. This was determined from results showing that the methanol combustion was initiated by flame propagation from the combustion of Diesel-fuel. It is advantageous that parts of the Diesel-fuel and methanol sprays be mixed.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Optimum Injection Timings of Gas-Oil and Methanol in Dual Fuel CI Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Enoki, Kiyoshi (Autor:in) / Sawa, Norihiro (Autor:in) / Hayashi, Shigenobu (Autor:in)

    Kongress:

    International Off-Highway & Powerplant Congress & Exposition ; 1993



    Erscheinungsdatum :

    1993-09-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Optimum injection timings of gas-oil and methanol in dual fuel CI engine

    Enoki, K. / Hayashi, S. / Sawa, N. | Tema Archiv | 1993


    Optimum injection timings of gas-oil and methanol in dual fuel compression ignition engine

    Enoki,K. / Hayashi,S. / Sawa,N. et al. | Kraftfahrwesen | 1993


    Combustion Phasing Controllability with Dual Fuel Injection Timings

    Johansson, B.H. / Leermakers, C.A.J. / Somers, L.M.T. | SAE Technical Papers | 2012


    DISI engine spark and fuel injection timings - effects, compromise and robustness

    Shayler,P.J. / Jones,S.T. / Horn,G. et al. | Kraftfahrwesen | 2001


    DISI Engine Spark and Fuel Injection Timings. Effects, Compromise and Robustness

    Eade, D. / Horn, G. / Shayler, P. J. et al. | SAE Technical Papers | 2001