Multi-fastener lap joints are vulnerable to fretting fatigue when they are subjected to repeated loading. In general the fretting fatigue condition leads to degraded properties of metallic structures due to the presence of the surface stress concentration resulting at the sites of fretting pits. In many cases, fretting can result in premature structure failures therefore a series of counter measures are frequently taken to minimize fretting especially at the fastener holes. One of major factors that affect the fretting phenomena between the fastener and fastener hole is the surface condition of the fasteners.In this study, the influences of the surface texture and the surface plating of the fastener on the joint life were investigated by conducting double lap shear fatigue testing. It has been found that the joint fretting fatigue resistance is very sensitive to the surface texture of the fastener and as the surface roughness of the fastener is reduced the joint life increases. In addition, the test results presented in this paper indicated that the use of copper plating substantially improves the joint life by reducing the fretting between the fasteners on the aluminum structure.
The Effects of Surface Texture on Fretting Fatigue between Fastener and Aluminum Structure
Sae Int. J. Aerosp
SAE 2010 Aerospace Manufacturing and Automated Fastening Conference & Exhibition ; 2010
Sae International Journal of Aerospace ; 3 , 1 ; 204-215
28.09.2010
12 pages
Aufsatz (Konferenz)
Englisch
Influence of Fastener Coatings on Fretting Fatigue
British Library Conference Proceedings | 2007
|Influence of Fastener Coatings on Fretting Fatigue
SAE Technical Papers | 2007
|2007-01-3890 Influence of Fastener Coatings on Fretting Fatigue
British Library Conference Proceedings | 2007
|2007-01-3890 Influence of Fastener Coatings on Fretting Fatigue
British Library Conference Proceedings | 2007
|Fretting Fatigue Analysis in Rapidly Solidified Powder Aluminum Alloy
SAE Technical Papers | 1998
|