Most of the recent clean diesel engines are equipped with an exhaust gas recirculation (EGR) technology in order to meet the strict criteria of NOx and particulate matter (PM) as required in the current emission regulations. More attention to strict EGR control is becoming required. Accurate and fast transient EGR ratio operation is becoming very critical in the field of the emission control.The EGR ratio is typically monitored by CO₂ trace method, in which CO₂ emitted from engine, is utilized as a tracer gas. The EGR ratio can be obtained from CO₂ concentration measured at engine intake and engine out at the same time. In this study, authors have developed a new EGR analyzer consisting of two CO₂ detectors, to achieve required performance for transient measurement, i.e., short delay time and quick response, negligible difference between two CO₂ detectors, and capability of wet measurement. For this new analyzer, heated NDIR detectors which can measure CO₂ in engine emission under wet condition were adopted. The sample lines for each CO₂ detector were configured to have small volume and also almost same design as each other, to avoid transient errors caused by the difference in response time.We have evaluated the performance of the transient EGR analyzer through some comparison tests with a conventional exhaust gas analyzers system. In consequence, the faster response has been observed from the transient EGR analyzer without significant transient error under several test cycles. Furthermore it has proved that effects on response time from the sample inlet pressure change are significantly small. Finally the EGR ratio measured by the transient EGR analyzer followed up the EGR valve operation well. These results show the advantages of the transient EGR analyzer for measuring EGR ratio under transient state.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Transient Exhaust Gas Recirculation Ratio Measurement Utilizing Heated NDIR Method


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2012 World Congress & Exhibition ; 2012



    Erscheinungsdatum :

    2012-04-16




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Transient Exhaust Gas Recirculation Ratio Measurement Utilizing Heated NDIR Method

    Yoshimura, T. / Miyai, M. / Nakamura, H. et al. | British Library Conference Proceedings | 2012


    Transient exhaust gas recirculation ratio measurement utilizing heated NDIR method

    Yoshimura,T. / Miyai,M. / Nakamura,H. et al. | Kraftfahrwesen | 2012


    Transient EGR Ratio Measurement by Heated NDIR Analyzer and Analysis of Engine EGR Response Time

    Yoshimura, T. / Asano, I. / Miyai, M. et al. | British Library Conference Proceedings | 2012


    Development of an On-board Measurement System Utilizing a Heated-type NDIR

    Nakamura, H. / Kihara, N. / Adachi, M. et al. | British Library Conference Proceedings | 2001


    Fast Response NDIR for Real-Time Exhaust Measurement

    Kohsaka, Hiroji / Miyatake, Kimio / Ishida, Kozo et al. | SAE Technical Papers | 1990