The largest contribution to engine rubbing friction is made by the piston and piston rings running in the cylinder liner. The magnitude and characteristics of the friction behaviour and the influence on these of factors such as surface roughness, piston design and lubricant properties are of keen interest. Investigating presents experimental challenges, including potential problems of uncontrolled build-to-build variability when component changes are made. These are addressed in the design of a new motored piston and floating liner rig. The design constrains transverse movement of a single liner using cantilevered mounts at the top and bottom. The mounts and two high stiffness strain gauged load cells constrain vertical movement. The outputs of the load cells are processed to extract the force contribution associated with friction. The liner, piston and crankshaft parts were taken from a EuroV-compliant, HPCR diesel engine with a swept capacity of 550cc per cylinder. Cooling, lubrication and an air injection system for cylinder pressure regulation are described. Example results are presented.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A New Floating-Liner Test Rig Design to Investigate Factors Influencing Piston-Liner Friction


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    MacMillan, David (Autor:in) / Kirk, Geoff (Autor:in) / Pegg, Ian (Autor:in) / Shayler, Paul J. (Autor:in) / Stark, Roland (Autor:in) / Law, Theo (Autor:in)

    Kongress:

    SAE 2012 World Congress & Exhibition ; 2012



    Erscheinungsdatum :

    16.04.2012




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A New Floating-Liner Test Rig Design to Investigate Factors Influencing Piston-Liner Friction

    Law, T. / MacMillan, D. / Shayler, P.J. et al. | British Library Conference Proceedings | 2012


    The measurement of piston/piston ring friction by the floating liner method

    Sherrington,J. / Smith,E.H. | Kraftfahrwesen | 1988


    Crank angle resolved floating-liner friction measurements on microstructured cylinder liner surfaces

    Pasligh, Henning / Oehlert, K. / Dinkelacker, F. et al. | Springer Verlag | 2016


    Crank angle resolved floating-liner friction measurements on microstructured cylinder liner surfaces

    Pasligh,H. / Oehlert,K. / Dinkelacker,F. et al. | Kraftfahrwesen | 2016


    Measurement of Piston Friction with a Floating Liner Engine for Heavy-Duty Applications

    Magyar, András / Szebényi, András / Raser, Bernhard et al. | SAE Technical Papers | 2022