Instantaneous in-cylinder pressure, a key variable in the improvement of engine performance and reduction of emissions, is not likely to be measured directly in production type engines in the near future. As a countermeasure, a pressure estimation method based on physical first principles for the estimation of the instantaneous in-cylinder pressure of an SI engine using measured crankshaft angular velocity is presented here.The approach consists of (a) mapping the model parameters at nominal operating conditions and (b) adapting the model parameters to current operating conditions using the instantaneous crankshaft angular velocity. The model reflects all essential effects on in-cylinder pressure, while the simulation time was reduced to 6 milliseconds per cycle on a standard PC. This makes it possible to estimate a cylinder-averaged pressure for each cycle up to an engine speed of more than 6000 rpm. The estimated in-cylinder pressure is available with a delay of one engine cycle.The model has been compared to a benchmark pressure estimation method. Further, the model has been validated in simulation and against measured data for steady-state and transient operation. The model shows good accuracy, while the computational effort is promising for real-time applications. Furthermore, the model needs little calibration effort due to its physically based nature.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Estimation of the Instantaneous In-Cylinder Pressure for Control Purposes using Crankshaft Angular Velocity


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2005 World Congress & Exhibition ; 2005



    Erscheinungsdatum :

    2005-04-11




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Individual Cylinder IMEP Estimation Using Crankshaft Angular Velocity Measurements

    Williams, J. / Witter, M. C. / Society of Automotive Engineers | British Library Conference Proceedings | 2001


    Individual Cylinder IMEP Estimation Using Crankshaft Angular Velocity Measurements

    Williams, Jeremy / Witter, Matthew C. | SAE Technical Papers | 2001


    Individual cylinder IMEP estimation using crankshaft angular velocity measurents

    Williams,J. / Witter,M.C. / Dynasim Research,US | Kraftfahrwesen | 2001