This paper describes the design and development of an engine with constant power for SAE's student Formula race-car competition, allowing the avoidance of gear shifting for much of the Autocross event. To achieve constant power for over 50% of the speed range, turbocharging was adopted with a boost pressure ratio of 2.8 at mid-range speeds and applied to an engine capacity of 430 cc. This engine was specifically designed and configured for the purpose, being a twin cylinder in-line arrangement with double overhead camshafts. Most of the engine components were specially cast or machined from billets. The capacity was selected to minimise frictional losses and thus increase delivered power along with dry sump lubrication and a three speed gear box. The engine manifolds and plenums were designed using a CAE application and proved to be well suited to the task resulting in excellent agreement between predicted and actual performance. One of the major challenges of the experimental development was overcoming the turbocharger oil consumption under throttled operation at part load conditions and at full power when the FSAE restrictor is choked. For the 2004 Australian competition the engine was run with slightly reduced mid speed power to avoid excessive use of the traction control system and was very competitive finishing first in the fuel economy event.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of a 430cc Constant Power Engine for FSAE Competition


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2006 World Congress & Exhibition ; 2006



    Erscheinungsdatum :

    2006-04-03




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of a 430 cc constant power engine for FSAE competition

    Attard,W. / Watson,H.C. / Univ.of Melbourne,AU | Kraftfahrwesen | 2006


    Optimal Design of FSAE Racing Engine Intake System

    Li, Shuhua / Wang, Can / Chen, Dandan et al. | Springer Verlag | 2022


    FSAE suspension development in virtual environment

    da Silva, Guilherme Canuto / Berretta, José Lucas Lima | SAE Technical Papers | 2018


    Camshaft Design for an Inlet-Restricted FSAE Engine

    McCartan, Charles / Cunningham, Geoff / McCullough, Geoff et al. | SAE Technical Papers | 2008


    Experimental Validation of an FSAE Engine Model

    McCartan, Charlie / Cunningham, Geoff / McCullough, Geoff et al. | SAE Technical Papers | 2008