A physics-based control-oriented model is developed to dynamically predict cycle-to-cycle combustion timing in transient fueling conditions for Homogeneous Charge Compression Ignition (HCCI) engines. The model simulates the engine cycle from the intake stroke to the exhaust stroke and includes the thermal coupling dynamics caused by the residual gases from one cycle to the next cycle. A residual gas model, a modified knock integral model, a fuel burn rate model, and thermodynamic models for the gas state in combustion and exhaust strokes are incorporated to simulate the engine cycle. The gas exchange process, generated work and completeness of combustion are predicted using semi-empirical correlations. The resulting model is parameterized for the combustion of Primary Reference Fuel (PRF) blends using 5703 simulations from a detailed thermo-kinetic model. Semi-empirical correlations in the model are parameterized using the experimental data obtained from a single-cylinder engine. The dynamics of fuel transport from intake port into the cylinder is described using the wall wetting fuel dynamic model. Step Air Fuel Ratio (AFR) excursions are used to excite the HCCI engine to determine the parameters for fuel dynamics using methods of system identification. In addition, the dynamics of exhaust gas transport and AFR sensor are included to correctly interpret measurements from the AFR sensor.Step fueling transient tests of the equivalence ratio and octane number are used to validate the model. Compared to the experimental measurements the model captures the ignition timing (CA50) transient dynamics with a maximum offset less than 2 degrees of crank angle. The model developed in this work seems promising for HCCI control as: all of its inputs can be relatively easily measured or estimated on an engine; has low computation requirements, and seems to have sufficient accuracy for control applications.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Dynamic Modeling of HCCI Combustion Timing in Transient Fueling Operation


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:

    Kongress:

    SAE World Congress & Exhibition ; 2009


    Erschienen in:

    Erscheinungsdatum :

    2009-04-20


    Format / Umfang :

    16 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Dynamic modeling of HCCI combustion timing in transient fueling operation

    Shahbakhti,M. / Koch,C.R. / Univ.of Alberta,CA | Kraftfahrwesen | 2009


    Combustion Chamber Wall Temperature Measurement and Modeling During Transient HCCI Operation

    Vressner, Andreas / Johansson, Bengt / Wilhelmsson, Carl et al. | SAE Technical Papers | 2005


    Combustion chamber wall temperature measurement and modeling during transient HCCI operation

    Wilhelmsson,C. / Vressner,A. / Tunestal,P. et al. | Kraftfahrwesen | 2005


    Active Combustion Control of Diesel HCCI Engine: Combustion Timing

    Chauvin, J. / Hillion, M. / Petit, N. et al. | SAE Technical Papers | 2008


    Active combustion control of diesel HCCI engine: combustion timing

    Hillion,M. / Chauvin,J. / Grondin,O. et al. | Kraftfahrwesen | 2008