The objective of this work was to develop an experimental system to support development and validation of a model for the lubrication of two-piece Twin-Land-Oil-Control-Rings (hereafter mentioned as TLOCR). To do so, a floating liner engine was modified by opening the head and crankcase. Additionally, only TLOCR was installed together with a piston that has 100 micron cold clearance to minimize the contribution of the skirt to total friction. Friction traces, FMEP trend, and repeatability have been examined to guarantee the reliability of the experiment results. Then, engine speed, liner temperature, ring tension, and land widths were changed in a wide range to ensure all three lubrication regimes were covered in the experiments. It was found that for each different ring land design, the measured instantaneous friction coefficient under different engine speed, liner temperature, and ring tension can roughly collapse to the same Stribeck curve, which indicates that the modified system and measurement protocol developed in this work can provide simple boundary conditions and sensible results such that a fair comparison can be made between experiment and theory.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Study of Friction between Piston Ring and Different Cylinder Liners using Floating Liner Engine - Part 1


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Chen, Haijie (Autor:in) / Liao, Kai (Autor:in) / Tian, Tian (Autor:in)

    Kongress:

    SAE 2012 World Congress & Exhibition ; 2012



    Erscheinungsdatum :

    16.04.2012




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    The Study of Friction between Piston Ring and Different Cylinder Liners using Floating Liner Engine - Part 1

    Liao, K. / Chen, H. / Tian, T. et al. | British Library Conference Proceedings | 2012


    The measurement of piston/piston ring friction by the floating liner method

    Sherrington,J. / Smith,E.H. | Kraftfahrwesen | 1988


    Lubricants effects on piston/ring/liner friction in an instrumented single cylinder diesel engine

    Gauthier,A. / Constans,B. / Perrin,H. et al. | Kraftfahrwesen | 1987


    Cylinder liner and piston ring development

    Wilson,K. / ADD,JP | Kraftfahrwesen | 1992


    Piston ring and cylinder liner problems

    Neale,M.J. / Eyre,T.S. / Michael Neale and Associates,Farnham,GB et al. | Kraftfahrwesen | 1982