The paper presents a measurement methodology which combines a fine-wire thermocouple with input reconstruction in order to measure crank angle resolved temperature in an engine air-intake system. Thermocouples that are of practical use in engine experiments tend to have a large time constant which affects measurement accuracy during rapid temperature transients. Input reconstruction methods have previously been applied to thermocouples but have not been specifically used in combination with an ultra-thin uninsulated wire thermocouple to investigate cyclic intake temperature behavior. Accurate measurement results are of interest to improve the validity of many crank-angle resolved engine models. An unshielded thermocouple sensor has been developed which is rigid enough to withstand the aerodynamic forces of the intake air. The nonlinear dependency of the sensor time constant was linearized and characterized at a number of mass flow rates by applying an identification method which uses two thermocouples with different diameters. For this purpose a test rig was designed to generate temperature step inputs at constant mass flow rates. A discrete time model of the sensor is finally directly inverted to reconstruct the true gas temperature. The results presented show how the sensor time constant was identified at several mass flow rates to establish a simple regression model describing the time constant as a function of air mass flow. Cyclic temperature data are finally presented including quick temperature transients caused by throttle tip-in and tip-out. The results are analyzed and compared with simulation results from a 1D engine model. This method simplifies previously demonstrated approaches and also applies, for the first time, the methodology for the purpose of intake-side cyclic temperature measurement.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Robust Methodology for Fast Crank Angle Based Temperature Measurement


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Mason, Byron (Autor:in) / Souflas, Ioannis (Autor:in) / Cary, Mark (Autor:in) / Schaal, Peter (Autor:in) / Filippou, Sotiris (Autor:in)

    Kongress:

    SAE 2016 World Congress and Exhibition ; 2016



    Erscheinungsdatum :

    2016-04-05




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    CRANK ANGLE ESTIMATION METHOD, CRANK ANGLE CONTROL METHOD, AND CRANK ANGLE ESTIMATION DEVICE FOR HYBRID VEHICLE

    KONDO KATSUHIKO / SUGITA HIDEHIKO / ASHIZAWA HIROYUKI | Europäisches Patentamt | 2018

    Freier Zugriff

    CRANK ANGLE CONTROL METHOD AND CRANK ANGLE CONTROL DEVICE FOR HYBRID VEHICLE

    KONDO KATSUHIKO / SUGITA HIDEHIKO / ITO TADASHI | Europäisches Patentamt | 2019

    Freier Zugriff

    Engine dynamics:time-based versus crank-angle based

    Chin,Y.K. / Coats,F.E. / General Motors Research Lab.,US | Kraftfahrwesen | 1986


    183, Crank Angle Analysis (20015311)

    Hald, J. / Gade, S. / Japan Society of Automotive Engineers | British Library Conference Proceedings | 2001