The accurate prediction of commercial-vehicle ride and handling performance with computer simulation tools is dependent on the level of correlation between the computer model and experimental data. Correlating vehicle attributes to physical test data is often challenging due to the large number of degrees of freedom - and, correspondingly, the large number of tunable parameters - typically required to accurately model vehicle behavior. A high level of interaction between input parameters and vehicle attributes further complicates the task. As a result, this type of correlation is a multi-objective optimization exercise in which the judicious planning of supporting test activity is critical to achieving the right level of model accuracy with an acceptable amount of resource investment.This paper discusses the methodology implemented in the validation of a tractor-semitrailer ADAMS model for both ride and handling simulations and presents the results obtained. A select set of vehicle-, subsystem- and component-level tests was performed to provide a basis for subsystem correlation and subsystem-interaction studies at the vehicle level. These included suspension characterization, modal testing, moment of inertia measurements and other specific component tests. Lastly, key vehicle ride and handling performance metrics were measured using skid pad maneuvers and on-highway data acquisition and these data used to validate the predictive capabilities of the model.This multilevel approach proved an effective tool in developing a well-correlated model by helping to expose model deficiencies and better isolate their source. It also provided valuable insight into subsystem dynamic behavior changes due to interactions with other subsystems in the full-vehicle environment.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Multi-Level Approach for the Validation of a Tractor-Semitrailer Ride and Handling Model


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE Commercial Vehicle Engineering Congress & Exhibition ; 2004



    Erscheinungsdatum :

    2004-10-26




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A multi-level approach for the validation of a tractor-semitrailer ride and handling model

    Cassara,S.J. / Anderson,D.C. / Olofsson,J.M. et al. | Kraftfahrwesen | 2004


    2004-01-2694 A Multi-Level Approach for the Validation of a Tractor-Semitrailer Ride and Handling Model

    Cassara, S. J. / Anderson, D. C. / Olofsson, J. M. et al. | British Library Conference Proceedings | 2004


    Tractor-Semitrailer Handling: A Dynamic Tractor Suspension Model

    Krauter, Allan I. / Vincent, Ronald J. | SAE Technical Papers | 1973


    Simulation of Tractor-Semitrailer Handling

    Krauter, A. I. / Wilson, R. K. | SAE Technical Papers | 1972


    Semitrailer tractor workbench device

    FANG SHILONG / LI TUAN / HUANG XIN et al. | Europäisches Patentamt | 2022

    Freier Zugriff