In this paper, optimized single and double injection schemes were found using multi-dimensional engine simulation software (KIVA-3V) and a micro-genetic algorithm for a heavy duty diesel engine. The engine operating condition considered was at 1737 rev/min and 57 % load. The engine simulation code was validated using an engine equipped with a hydraulic-electronically controlled unit injector (HEUI) system. Five important parameters were used for the optimization - boost pressure, EGR rate, start-of-injection timing, fraction of fuel in the first pulse and dwell angle between first and second pulses. The optimum results for the single injection scheme showed significant improvements for the soot and NOx emissions. The start of injection timing was found to be very early, which suggests HCCI-like combustion. Optimized soot and NOx emissions were reduced to 0.005 g/kW-hr and 1.33 g/kW-hr, respectively, for the single injection scheme. Moreover, the final optimum results met the EPA 2007 mandates at the operating point considered. The use of a double injection scheme showed little benefits in terms of engine performance compared to the single injection scheme. In fact, the double injection GA simulation result converged to a single injection scheme.
Application of Micro-Genetic Algorithms for the Optimization of Injection Strategies in a Heavy-Duty Diesel Engine
Sae Technical Papers
SAE 2005 World Congress & Exhibition ; 2005
2005-04-11
Aufsatz (Konferenz)
Englisch
Experimental optimization of a heavy-duty diesel engine using automated genetic algorithms
Kraftfahrwesen | 2002
|Experimental Optimization of a Heavy-Duty Diesel Engine Using Automated Genetic Algorithms
SAE Technical Papers | 2002
|Injection strategies for heavy duty DI diesel engines
TIBKAT | 2004
|SAE Technical Papers | 2008
|